How to service and repair the front bumper cover and fascia on 2000 Lincoln Town Car?

You must start bumper service and repair by removing the center lower air deflector and following it up with the left-hand (LH) and right-hand (RH) air deflectors. Start by removing all the bolts as well as two screws found on each side before removing the screw from each wheel well. Detach the three nuts from both sides of the front bumper cover (part number 17D957) before extracting the front bumper cover. First take off the three pushpins from each side then remove the bolts that detach the front bumper (part number 17757) before extracting the bolt. Install the air deflectors between the valance shields and radiator support before conducting a reverse order of the removal process to finish installation.

OEM 2000 Lincoln Town Car Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Bumpers found

View related parts
2000 Lincoln Town Car Impact Bar, Front
Part Number: YW1Z-17757-AA
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Steel
- Position: Front
- Replaces: F8VZ-17757-AA
- Base No.: 17757
- Item Weight: 16.20 Pounds
- Item Dimensions: 62.4 x 10.4 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YW1Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Signature | 8 Cyl 4.6 L GAS
View related parts
2000 Lincoln Town Car Bumper Cover
Part Number: F8VZ-17K835-BA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match
- Replaces: XW1Z-17K835-CAA, XW1Z-17K835-AAA
- Base No.: 17K835
- Item Weight: 21.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8VZ-17K835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Signature | 8 Cyl 4.6 L GAS
View related parts
2000 Lincoln Town Car Bumper Cover
Part Number: F8VZ-17D957-BA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match
- Replaces: F8VZ-17D957-CAA
- Base No.: 17D957
- Item Weight: 23.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8VZ-17D957-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Signature | 8 Cyl 4.6 L GAS
View related parts
2000 Lincoln Town Car Impact Bar, Rear
Part Number: F8VZ-17906-AA
Product Specifications
- Other Name: Bumper Assembly - Rear
- Position: Rear
- Base No.: 17906
- Item Weight: 16.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8VZ-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Signature | 8 Cyl 4.6 L GAS

2000 Lincoln Town Car Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln Town Car Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln Town Car Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Lincoln Town Car Bumper Parts Questions & Experts Answers

Q: How to service and repair the front bumper cover and fascia on 2000 Lincoln Town Car?
A: You must start bumper service and repair by removing the center lower air deflector and following it up with the left-hand (LH) and right-hand (RH) air deflectors. Start by removing all the bolts as well as two screws found on each side before removing the screw from each wheel well. Detach the three nuts from both sides of the front bumper cover (part number 17D957) before extracting the front bumper cover. First take off the three pushpins from each side then remove the bolts that detach the front bumper (part number 17757) before extracting the bolt. Install the air deflectors between the valance shields and radiator support before conducting a reverse order of the removal process to finish installation.