How to service and repair the rear bumper cover and fascia on 2001 Lincoln Town Car?

The rear bumper cover and fascia servicing starts with screw removal from each side and subsequent removal of the three pushpins from each side. Between these steps, remove first the bolts then extract both the right-hand side (RH) and left-hand side (LH) luggage compartment trim pieces. Remove first the three nuts holding the bamper from each side before removing the rest of the three nuts. The procedure next requires the detachment of the rear bumper cover which carries the part number 17K835 and the rear bumper identified by part number 17906 after nullifying the fastening nuts. The removal process ends with a bolt taken out to detach the rear bumper isolator and bracket (part number 17787). Perform installation by following the reversal of removal procedures.

OEM 2001 Lincoln Town Car Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Bumpers found

View related parts
2001 Lincoln Town Car Impact Bar, Front
Part Number: YW1Z-17757-AA
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Steel
- Position: Front
- Replaces: F8VZ-17757-AA
- Base No.: 17757
- Item Weight: 16.20 Pounds
- Item Dimensions: 62.4 x 10.4 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YW1Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Signature | 8 Cyl 4.6 L GAS
View related parts
2001 Lincoln Town Car Bumper Cover
Part Number: F8VZ-17K835-BA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match
- Replaces: XW1Z-17K835-CAA, XW1Z-17K835-AAA
- Base No.: 17K835
- Item Weight: 21.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8VZ-17K835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Signature | 8 Cyl 4.6 L GAS
View related parts
2001 Lincoln Town Car Bumper Cover
Part Number: F8VZ-17D957-BA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match
- Replaces: F8VZ-17D957-CAA
- Base No.: 17D957
- Item Weight: 23.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8VZ-17D957-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Signature | 8 Cyl 4.6 L GAS
View related parts
2001 Lincoln Town Car Impact Bar, Rear
Part Number: F8VZ-17906-AA
Product Specifications
- Other Name: Bumper Assembly - Rear
- Position: Rear
- Base No.: 17906
- Item Weight: 16.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8VZ-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Signature | 8 Cyl 4.6 L GAS

2001 Lincoln Town Car Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Lincoln Town Car Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Lincoln Town Car Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Lincoln Town Car Bumper Parts Questions & Experts Answers

Q: How to service and repair the rear bumper cover and fascia on 2001 Lincoln Town Car?
A: The rear bumper cover and fascia servicing starts with screw removal from each side and subsequent removal of the three pushpins from each side. Between these steps, remove first the bolts then extract both the right-hand side (RH) and left-hand side (LH) luggage compartment trim pieces. Remove first the three nuts holding the bamper from each side before removing the rest of the three nuts. The procedure next requires the detachment of the rear bumper cover which carries the part number 17K835 and the rear bumper identified by part number 17906 after nullifying the fastening nuts. The removal process ends with a bolt taken out to detach the rear bumper isolator and bracket (part number 17787). Perform installation by following the reversal of removal procedures.