My Garage
Cart

OEM 2000 Lincoln Town Car Crankshaft Seal

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Seal found

  • 2000 Lincoln Town Car Crankshaft Seal Diagram - F4AZ-6701-A
    View related parts

    2000 Lincoln Town Car Rear Main Seal Part Number: F4AZ-6701-A

    $29.36 MSRP: $41.65
    You Save: $12.29 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Seal Assembly - Crankshaft Oil; Engine Crankshaft Seal, Rear; Timing Cover Gasket; Timing Cover Seal; Oil Seal; Crankshaft Seal; Rear Seal; Timing Cover Seal; Oil Pan Seal.
    • Position: Rear
    • Replaces: F3AZ-6701-B
    • Base No.: 6701
    • Item Weight: 0.30 Pounds
    • Item Dimensions: 8.4 x 6.7 x 1.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: F4AZ-6701-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2000 Lincoln Town Car Submodels:
    • Anniversary, Base, Cartier, Cartier L, Cypress, Designer Series, Executive, Executive L, Executive Protection Series, Jack Nicklaus, Protection Series, Signature, Signature L, Signature Limited, Touring Edition, Tournament Edition, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2000 Lincoln Town Car Crankshaft Seal

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln Town Car Crankshaft Seal available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln Town Car Crankshaft Seal as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Lincoln Town Car Crankshaft Seal Parts Q&A

  • Q: How to service the front crankshaft seal on 2000 Lincoln Town Car?
    A: The service of front crankshaft seal requires the removal of crankshaft pulley as the first step. The Front Cover Seal Remover (part A) should be used to pull out the front cover seal (part B). The installation process requires front cover (part A) and inner lip of front oil seal (part B) lubrication with Super Premium SAE 5W-30 Motor Oil (part number XO-5W30-QSP) or WSS-M2C153-G equivalent quality oil. The Crankshaft Seal Replacer/Cover Aligner (part A) serves to mount part B the crankshaft front seal inside part C the engine front cover. Finally, reinstall the crankshaft pulley.