How to service and repair the parking brake cable on all on 2000 Mercury Sable?

All vehicle maintenance for parking brake cables starts by taking off the right rear wheel assembly along with the tire. Tighten a grip on the rod as you rotate the adjustment nut to achieve parking brake cable slackness. First detach the RH rear parking brake conduit together with the cable before proceeding to remove the LH rear parking brake conduit together with the cable. The retainer squeezing method removes the parking brake equalizer before separating the RH rear parking brake cable and conduit from the body bracket. Vehicle owners should remove the brake drum then disconnect the parking brake cable from brake shoes while focusing on the front shoe removal on drum brake systems. Compression of the retainer allows you to extract the parking brake cable along with the conduit from the brake backing plate. To work on disc brakes you should remove the parking brake cable and conduit before disconnecting the cable while removing the E-clip in order to pull out the cable and conduit from the disc brake caliper. Install the cable and conduit by removing the bolt then ensure snap-in retainers remain locked until the installation process finishes according to the reversal order of removal. Perform the parking brake cable adjustment as the last step.

OEM 2000 Mercury Sable Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Parking Brake Cables found

View related parts
2000 Mercury Sable Front Cable Part Number: YF1Z-2853-AA
$11.85 MSRP: $16.39
You Save: $4.54 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Base No.: 2853
- Item Weight: 1.20 Pounds
- Item Dimensions: 7.4 x 8.0 x 26.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-2853-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Mercury Sable Submodels:
- GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2000 Mercury Sable Rear Cable, Passenger Side Part Number: F8DZ-2A635-BA
$16.52 MSRP: $22.85
You Save: $6.33 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: RH , rear disc
- Position: Passenger Side
- Base No.: 2A635
- Item Weight: 2.20 Pounds
- Item Dimensions: 7.4 x 8.0 x 27.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8DZ-2A635-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Mercury Sable Submodels:
- GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2000 Mercury Sable Rear Cable, Driver Side Part Number: F8DZ-2A635-BB
$9.09 MSRP: $12.57
You Save: $3.48 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: LH , rear disc
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 1.00 Pounds
- Item Dimensions: 7.2 x 8.0 x 27.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8DZ-2A635-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Mercury Sable Submodels:
- GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2000 Mercury Sable Rear Cable, Driver Side Part Number: YF1Z-2A635-AA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: LH, rear drum
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 0.90 Pounds
- Item Dimensions: 34.5 x 1.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-2A635-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Mercury Sable Submodels:
- GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2000 Mercury Sable Rear Cable, Passenger Side Part Number: F8DZ-2A635-AA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: RH, rear drum
- Position: Passenger Side
- Base No.: 2A635
- Item Weight: 2.20 Pounds
- Item Dimensions: 7.2 x 7.9 x 27.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8DZ-2A635-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Mercury Sable Submodels:
- GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2000 Mercury Sable Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Mercury Sable Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Mercury Sable Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Mercury Sable Parking Brake Cable Parts Q&A

Q: How to service and repair the parking brake cable on all on 2000 Mercury Sable?
A: All vehicle maintenance for parking brake cables starts by taking off the right rear wheel assembly along with the tire. Tighten a grip on the rod as you rotate the adjustment nut to achieve parking brake cable slackness. First detach the RH rear parking brake conduit together with the cable before proceeding to remove the LH rear parking brake conduit together with the cable. The retainer squeezing method removes the parking brake equalizer before separating the RH rear parking brake cable and conduit from the body bracket. Vehicle owners should remove the brake drum then disconnect the parking brake cable from brake shoes while focusing on the front shoe removal on drum brake systems. Compression of the retainer allows you to extract the parking brake cable along with the conduit from the brake backing plate. To work on disc brakes you should remove the parking brake cable and conduit before disconnecting the cable while removing the E-clip in order to pull out the cable and conduit from the disc brake caliper. Install the cable and conduit by removing the bolt then ensure snap-in retainers remain locked until the installation process finishes according to the reversal order of removal. Perform the parking brake cable adjustment as the last step.