How to service and repair the front parking brake cable and conduit on Mercury Sable?

Before working on front parking brake cable along with conduit you must first release the park brake system. You should start by taking out the scuff plate plus drawing back the carpet so you can feed the front parking brake cable and conduit grommet through the floor pan. You must separate the front parking brake cable and conduit when you squeeze its retaining clip to pull them from the parking brake control. Lift the vehicle by hoist to access the components before using the rod along with the adjustment nut to extract the front parking brake cable and conduit from the adjuster. Remove the cable and conduit from the body bracket after squeezing the retainer to detach them. Installation of this part follows the reversal of all removal steps until the parking brake cable is properly adjusted.

How to remove and replace the rear parking brake cable on Mercury Sable?

One must begin the parking brake cable work by releasing the tension on this cable before the replacement process starts. The right-hand cable removal process requires releasing the intermediate cable from the rear cable-to-cable union. The left-hand cable needs its connection to the intermediate cable released at the equalizer location. Start by uninstalling both the brake caliper parking brake cable then detach the rear cable conduit from the rear subframe bracket. The upper control arm parking brake cable bracket requires nut removal before tightening it to 37 Nm (27 lb-ft) during assembly. Conclude the process by uninstalling all components then check the parking brake system operates correctly.

OEM Mercury Sable Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Parking Brake Cables found

View related parts
Mercury Sable Front Cable Part Number: FB5Z-2853-A
$47.40 MSRP: $75.27
You Save: $27.87 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: 8G1Z-2853-A, 9G1Z-2853-A, 9G1Z-2853-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Front Cable Part Number: YF1Z-2853-AA
$11.85 MSRP: $16.39
You Save: $4.54 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rear Cable, Driver Side Part Number: F8DZ-2A635-BB
$9.09 MSRP: $12.57
You Save: $3.48 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: LH , rear disc
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rear Cable, Passenger Side Part Number: F8DZ-2A635-BA
$16.52 MSRP: $22.85
You Save: $6.33 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: RH , rear disc
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Front Cable Part Number: F8DZ-2853-AA
$22.98 MSRP: $31.79
You Save: $8.81 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-1999 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rear Cable, Driver Side Part Number: 6F9Z-2A635-K
$53.59 MSRP: $74.13
You Save: $20.54 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 6F9Z-2A635-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Rear Cable, Passenger Side Part Number: 9F9Z-2A635-B
$57.71 MSRP: $91.64
You Save: $33.93 (38%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 6F9Z-2A635-F, 6F9Z-2A635-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Rear Cable, Driver Side Part Number: 9F9Z-2A635-A
$57.71 MSRP: $91.64
You Save: $33.93 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 6F9Z-2A635-H, 6F9Z-2A635-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Rear Cable, Driver Side Part Number: YF1Z-2A635-AA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: LH, rear drum
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rear Cable, Passenger Side Part Number: 6F9Z-2A635-E
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 6F9Z-2A635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Rear Cable, Passenger Side Part Number: F8DZ-2A635-AA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: RH, rear drum
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rear Cable Part Number: F6DZ2A635AD
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996 Mercury Sable | G, GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rear Cable Part Number: E7DZ2A635D
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Parking Brake Cable; Brake Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1991 Mercury Sable | GS, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rear Cable Part Number: E7DZ2A635A
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Parking Brake Cable; Brake Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1995 Mercury Sable | GS, LS, LTS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Front Cable Part Number: E6DZ2853A
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Parking Brake Cable; Brake Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1992 Mercury Sable | GS, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Rear Cable, Passenger Side Part Number: 3F1Z-2A635-AA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: RH, rear drum
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mercury Sable Parking Brake Cable

OEM Parking Brake Cable boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Parking Brake Cable with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Sable Parking Brake Cable is one of the most significant parts that emphasize on the dependability and efficiency of the Mercury Sable Parking brake system. While this cable is quite basic, it links the parking brake to the braking system of the car to help make the Mercury Sable firmly and safely remain parked especially on slopes as it increases safety and performance. The Parking Brake Cable is compatible with the Mercury Sable across the production range and has been manufactured to fit the different models effectively. A component of the Mercury Sable, the Parking Brake Cable is perhaps not as recognized for its revolutionary design, but its performance and durability are complemented when it does not get faulty, which causes either insufficient tension or no tension at all, and increase risks to the vehicle. It would be essential to keep properly servicing the parking brake cable so as to retain the mechanical properties of the parking brake system. However, one aspect where the might pale in comparison is in the Mercury Sable Parking Brake Cable, this being because the particular car model boasts of having a very strong design as well as the very best and highly durable materials that are known to give it a boost in terms of its performance. Given the popularity of the Mercury Sable line and particularly the model which was one of the best sellers at a certain period the reliability of such components as Parking Brake Cable are also very vital. Therefore, the Mercury Sable Parking Brake Cable, as a part, does not only work for form but also for function - to boost the satisfaction of every Mercury Sable driver through safety and dependability.

Mercury Sable Parking Brake Cable Parts and Q&A

Front Cable
YF1Z-2853-AA
Q: How to service and repair the front parking brake cable and conduit on Mercury Sable?
A:
Before working on front parking brake cable along with conduit you must first release the park brake system. You should start by taking out the scuff plate plus drawing back the carpet so you can feed the front parking brake cable and conduit grommet through the floor pan. You must separate the front parking brake cable and conduit when you squeeze its retaining clip to pull them from the parking brake control. Lift the vehicle by hoist to access the components before using the rod along with the adjustment nut to extract the front parking brake cable and conduit from the adjuster. Remove the cable and conduit from the body bracket after squeezing the retainer to detach them. Installation of this part follows the reversal of all removal steps until the parking brake cable is properly adjusted.
Rear Cable, Driver Side
9F9Z-2A635-A
Q: How to remove and replace the rear parking brake cable on Mercury Sable?
A:
One must begin the parking brake cable work by releasing the tension on this cable before the replacement process starts. The right-hand cable removal process requires releasing the intermediate cable from the rear cable-to-cable union. The left-hand cable needs its connection to the intermediate cable released at the equalizer location. Start by uninstalling both the Brake Caliper parking brake cable then detach the rear cable conduit from the rear subframe bracket. The upper control arm parking brake cable bracket requires nut removal before tightening it to 37 Nm (27 lb-ft) during assembly. Conclude the process by uninstalling all components then check the parking brake system operates correctly.