FordParts
My Garage
My Account
Cart
OEM 2001 Ford Crown Victoria Control Arm
Suspension Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Control Arms found
2001 Ford Crown Victoria Control Arm, Front Passenger Side Part Number: F7AZ-3084-BA
$155.54 MSRP: $211.66You Save: $56.12 (27%)Product Specifications- Other Name: Arm Assembly - Front Suspension; Control Arm and Ball Joint Assembly.; Upper Control Arm
- Position: Front Passenger Side
- Replaces: F6AZ-3084-BA
- Base No.: 3084
- Item Weight: 10.60 Pounds
- Item Dimensions: 5.3 x 15.8 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7AZ-3084-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Arm Assembly - Front Suspension; Control Arm and Ball Joint Assembly.; Upper Control Arm
- Position: Front Passenger Side
- Replaces: F6AZ-3084-AA
- Base No.: 3084
- Item Weight: 9.80 Pounds
- Item Dimensions: 15.8 x 11.4 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7AZ-3084-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Arm Assembly - Front Suspension; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Lower Control Arm
- Position: Front Passenger Side
- Base No.: 3078
- Item Weight: 20.90 Pounds
- Item Dimensions: 17.6 x 7.7 x 22.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW1Z-3078-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Arm Assembly - Front Suspension; Control Arm and Ball Joint Assembly.; Upper Control Arm
- Position: Front Driver Side
- Replaces: F6AZ-3085-AA
- Base No.: 3085
- Item Weight: 10.30 Pounds
- Item Dimensions: 3.8 x 14.8 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7AZ-3085-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Arm Assembly - Front Suspension; Control Arm and Ball Joint Assembly.; Upper Control Arm
- Position: Front Driver Side
- Replaces: F5AZ-3085-B
- Base No.: 3085
- Item Weight: 10.40 Pounds
- Item Dimensions: 18.3 x 5.2 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6AZ-3085-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Arm Assembly - Front Suspension; Control Arm and Ball Joint Assembly.; Lower Control Arm
- Position: Front Driver Side
- Replaces: XW1Z-3079-DA
- Base No.: 3079
- Item Weight: 20.50 Pounds
- Item Dimensions: 17.6 x 7.5 x 22.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW1Z-3079-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Crown Victoria Control Arm
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Crown Victoria Control Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Crown Victoria Control Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford Crown Victoria Control Arm Parts Q&A
- Q: How to service and repair the upper control arm on 2001 Ford Crown Victoria?A: Service and repair operations on the upper control arm start by lifting the vehicle while using supports along with removing the wheel and tire assembly. Lower the vehicle through the usage of a proper jack stand positioned under the front suspension lower arm until the lower arm starts to move. A safety wire should secure the front wheel spindle to the frame before removing the bolt and nut to disconnect the front suspension upper arm through the two nuts and bolts. After suspender height reaches curb height the front suspension upper arm nuts and bolts need installation but should be left untightened until this point is achieved before proceeding with the removal steps in reverse order. Adjust wheel alignment before completing the procedure. The replacement of suspension fasteners should only happen with parts having either the exact part number or equivalent parts because inferior quality or substitute designs could introduce serious service problems. The reassembly procedure requires users to maintain the correct torque settings for retaining these essential components effectively.