How to service the blower motor resistor for the auxiliary climate control on 2001 Ford E-250 Econoline?

The servicing of the blower motor resistor requires initial bench seat removal when third, fourth and fifth seats exist. Start by removing the left center bolster trim panel together with the quarter trim rear upper panel and lower rear body side trim panel. You should first disconnect the heater blower motor switch resistor connector before unscrewing and removing the resistor. Install the heater blower motor switch resistor by performing the removal steps in reverse order.

OEM 2001 Ford E-250 Econoline Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

View related parts
2001 Ford E-250 Econoline Blower Motor Resistor, Front Part Number: 4C2Z-19A706-AA
$25.46 MSRP: $40.44
You Save: $14.98 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Resistor Assembly; HVAC Blower Motor Resistor, Front; HVAC Blower Motor Regulator; Resistor; HVAC Blower Motor Resistor
- Position: Front
- Replaces: F6UZ-19A706-AA
- Base No.: 19A706
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C2Z-19A706-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford E-250 Econoline Submodels:
- Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2001 Ford E-250 Econoline Resistor, Front Part Number: E8UZ-19A706-A
Product Specifications
- Other Name: Resistor Assembly; HVAC Blower Motor Resistor, Front; Blower Motor Resistor
- Position: Front
- Base No.: 19A706
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 2.6 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E8UZ-19A706-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford E-250 Econoline Submodels:
- Base, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS

2001 Ford E-250 Econoline Blower Motor Resistor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford E-250 Econoline Blower Motor Resistor available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford E-250 Econoline Blower Motor Resistor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford E-250 Econoline Blower Motor Resistor Parts Q&A

Q: How to service the blower motor resistor for the auxiliary climate control on 2001 Ford E-250 Econoline?
A: The servicing of the blower motor resistor requires initial bench seat removal when third, fourth and fifth seats exist. Start by removing the left center bolster trim panel together with the quarter trim rear upper panel and lower rear body side trim panel. You should first disconnect the heater blower motor switch resistor connector before unscrewing and removing the resistor. Install the heater blower motor switch resistor by performing the removal steps in reverse order.