How to Service and Repair the Motor and Transmission Mount on 2001 Ford Excursion?

Service and repair operations for the transmission mount start with hoisting the vehicle and removing nuts. Before applying the high-lift transmission jack make sure the back of the transmission does not exceed safe clearance heights to guarantee protection of the TSS and OSS sensors. First raise the transmission off the rear crossmember support to remove the rear transmission mount then finish by removing its bolts and mount. When installing the mount avoid lifting the transmission back higher than necessary. Aim the transmission upward before fixing the rear transmission mount through bolt installation. After lowering the transmission onto the rear crossmember support, return the nuts and take out the high-lift transmission jack followed by removing the supports prior to dropping the car down.

OEM 2001 Ford Excursion Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Motor And Transmission Mounts found

View related parts
2001 Ford Excursion Motor Mount, Passenger Side
Part Number: 2C3Z-6038-AC
$144.37 MSRP: $199.72
You Save: $55.35 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount
- Manufacturer Note: RH, 4x4
- Position: Passenger Side
- Replaces: 2C3Z-6038-AB
- Base No.: 6038
- Item Weight: 6.60 Pounds
- Item Dimensions: 9.5 x 9.1 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-6038-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
2001 Ford Excursion Mount Bracket, Driver Side
Part Number: F81Z-6031-AA
$71.19 MSRP: $98.49
You Save: $27.30 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Motor Mount; Engine Mount Bracket
- Position: Driver Side
- Base No.: 6031
- Item Weight: 6.00 Pounds
- Item Dimensions: 9.1 x 8.5 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6031-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2001 Ford Excursion Motor Mount, Driver Side
Part Number: 2C3Z-6038-AD
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount; Mount
- Position: Driver Side
- Replaces: 2C3Z-6038-AA
- Base No.: 6038
- Item Weight: 6.70 Pounds
- Item Dimensions: 9.6 x 5.2 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-6038-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
2001 Ford Excursion Motor Mount, Driver Side
Part Number: 2C7Z-6038-AD
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
- Manufacturer Note: LH, 4x2
- Position: Driver Side
- Replaces: 2C7Z-6038-AA
- Base No.: 6038
- Item Weight: 7.10 Pounds
- Item Dimensions: 9.3 x 7.2 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C7Z-6038-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2001 Ford Excursion Motor Mount, Driver Side
Part Number: 2C3Z-6038-BD
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount; Mount
- Manufacturer Note: LH, 4x4
- Position: Driver Side
- Replaces: 2C3Z-6038-BA
- Base No.: 6038
- Item Weight: 7.00 Pounds
- Item Dimensions: 9.4 x 9.1 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-6038-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2001 Ford Excursion Motor Mount, Passenger Side
Part Number: 2C3Z-6038-BC
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount
- Manufacturer Note: RH, 4x4
- Position: Passenger Side
- Replaces: 2C3Z-6038-BB
- Base No.: 6038
- Item Weight: 11.10 Pounds
- Item Dimensions: 9.3 x 8.9 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-6038-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2001 Ford Excursion Transmission Mount
Part Number: F81Z-6068-AA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount; Rear Support
- Base No.: 6068
- Item Weight: 6.10 Pounds
- Item Dimensions: 9.5 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6068-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2001 Ford Excursion Motor Mount, Passenger Side
Part Number: F81Z-6038-CB
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Base No.: 6038
- Item Weight: 7.60 Pounds
- Item Dimensions: 9.1 x 8.0 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6038-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2001 Ford Excursion Motor Mount
Part Number: F81Z-6038-CA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left, Right; Engine Mount Bracket; Front Mount
- Base No.: 6038
- Item Weight: 7.50 Pounds
- Item Dimensions: 7.9 x 6.0 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6038-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2001 Ford Excursion Trans Crossmember
Part Number: 4C7Z-6A023-AA
Product Specifications
- Other Name: Bracket; Transmission Crossmember
- Manufacturer Note: FROM 09/08/03
- Base No.: 6A023
- Item Weight: 7.10 Pounds
- Item Dimensions: 9.3 x 8.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C7Z-6A023-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2001 Ford Excursion Motor Mount, Passenger Side
Part Number: 2C7Z-6038-BB
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Manufacturer Note: RH, 4x2
- Position: Passenger Side
- Replaces: 2C7Z-6038-BA
- Base No.: 6038
- Item Weight: 7.70 Pounds
- Item Dimensions: 9.3 x 8.3 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C7Z-6038-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2001 Ford Excursion Motor Mount, Passenger Side
Part Number: 2C7Z-6038-AC
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Manufacturer Note: RH, 4x2
- Position: Passenger Side
- Base No.: 6038
- Item Weight: 6.50 Pounds
- Item Dimensions: 9.2 x 8.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C7Z-6038-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
2001 Ford Excursion Rear Mount
Part Number: YC3Z-6068-BB
Product Specifications
- Other Name: Insulator Assembly - Engine; Manual Transmission Mount; Engine Mount Bracket; Motor Mount; Rear Support; Insulator Assembly - Engine Support
- Manufacturer Note: With damper asy. , 4x2
- Base No.: 6068
- Item Weight: 12.60 Pounds
- Item Dimensions: 9.5 x 8.4 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC3Z-6068-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2001 Ford Excursion Mount Bracket, Passenger Side
Part Number: F81Z-6030-CA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Base No.: 6030
- Item Weight: 4.20 Pounds
- Item Dimensions: 9.4 x 8.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6030-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
2001 Ford Excursion Rear Mount
Part Number: YC3Z-6068-BA
Product Specifications
- Other Name: Insulator Assembly - Engine; Automatic Transmission Mount; Engine Mount Bracket; Motor Mount; Rear Support; Insulator Assembly - Engine Support
- Manufacturer Note: 4x4
- Base No.: 6068
- Item Weight: 4.60 Pounds
- Item Dimensions: 9.3 x 8.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC3Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2001 Ford Excursion Mount Bracket, Passenger Side
Part Number: F81Z-6030-BA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Position: Passenger Side
- Base No.: 6030
- Item Weight: 6.30 Pounds
- Item Dimensions: 9.1 x 8.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6030-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL

2001 Ford Excursion Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Excursion Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Excursion Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Excursion Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount on 2001 Ford Excursion?
A: Service and repair operations for the transmission mount start with hoisting the vehicle and removing nuts. Before applying the high-lift transmission jack make sure the back of the transmission does not exceed safe clearance heights to guarantee protection of the TSS and OSS sensors. First raise the transmission off the rear crossmember support to remove the rear transmission mount then finish by removing its bolts and mount. When installing the mount avoid lifting the transmission back higher than necessary. Aim the transmission upward before fixing the rear transmission mount through bolt installation. After lowering the transmission onto the rear crossmember support, return the nuts and take out the high-lift transmission jack followed by removing the supports prior to dropping the car down.