How to Service and Repair the Motor and Transmission Mount on 2002 Ford Excursion?

Service and repair of the transmission mount starts by hoisting the vehicle and uninstalling the nuts. Select a fitting transmission jack for the operation while avoiding excessive back-jack positions which could harm either TSS or OSS sensors. First you must raise the transmission off the rear crossmember support to remove the rear transmission mount and then remove its bolts and mount. Use caution when installing the transmission to prevent rising it higher than necessary in the back. Fully elevate the transmission before placing and screwing in the rear transmission mount. The transmission process includes lowering it onto the rear crossmember support while installing the nuts and removing the high-lift transmission jack followed by support removal before lowering the vehicle.

OEM 2002 Ford Excursion Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Motor And Transmission Mounts found

View related parts
2002 Ford Excursion Motor Mount, Passenger Side
Part Number: 2C3Z-6038-AC
$144.37 MSRP: $199.72
You Save: $55.35 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount
- Manufacturer Note: RH, 4x4
- Position: Passenger Side
- Replaces: 2C3Z-6038-AB
- Base No.: 6038
- Item Weight: 6.60 Pounds
- Item Dimensions: 9.5 x 9.1 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-6038-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
2002 Ford Excursion Mount Bracket, Driver Side
Part Number: F81Z-6031-AA
$71.19 MSRP: $98.49
You Save: $27.30 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Motor Mount; Engine Mount Bracket
- Position: Driver Side
- Base No.: 6031
- Item Weight: 6.00 Pounds
- Item Dimensions: 9.1 x 8.5 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6031-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2002 Ford Excursion Motor Mount, Driver Side
Part Number: 2C3Z-6038-AD
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount; Mount
- Position: Driver Side
- Replaces: 2C3Z-6038-AA
- Base No.: 6038
- Item Weight: 6.70 Pounds
- Item Dimensions: 9.6 x 5.2 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-6038-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
2002 Ford Excursion Motor Mount, Driver Side
Part Number: 2C7Z-6038-AD
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
- Manufacturer Note: LH, 4x2
- Position: Driver Side
- Replaces: 2C7Z-6038-AA
- Base No.: 6038
- Item Weight: 7.10 Pounds
- Item Dimensions: 9.3 x 7.2 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C7Z-6038-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2002 Ford Excursion Motor Mount, Driver Side
Part Number: 2C3Z-6038-BD
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount; Mount
- Manufacturer Note: LH, 4x4
- Position: Driver Side
- Replaces: 2C3Z-6038-BA
- Base No.: 6038
- Item Weight: 7.00 Pounds
- Item Dimensions: 9.4 x 9.1 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-6038-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2002 Ford Excursion Motor Mount, Passenger Side
Part Number: 2C3Z-6038-BC
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount
- Manufacturer Note: RH, 4x4
- Position: Passenger Side
- Replaces: 2C3Z-6038-BB
- Base No.: 6038
- Item Weight: 11.10 Pounds
- Item Dimensions: 9.3 x 8.9 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-6038-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2002 Ford Excursion Transmission Mount
Part Number: F81Z-6068-AA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount; Rear Support
- Base No.: 6068
- Item Weight: 6.10 Pounds
- Item Dimensions: 9.5 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6068-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2002 Ford Excursion Motor Mount, Passenger Side
Part Number: F81Z-6038-CB
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Base No.: 6038
- Item Weight: 7.60 Pounds
- Item Dimensions: 9.1 x 8.0 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6038-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2002 Ford Excursion Motor Mount
Part Number: F81Z-6038-CA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left, Right; Engine Mount Bracket; Front Mount
- Base No.: 6038
- Item Weight: 7.50 Pounds
- Item Dimensions: 7.9 x 6.0 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6038-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2002 Ford Excursion Trans Crossmember
Part Number: 4C7Z-6A023-AA
Product Specifications
- Other Name: Bracket; Transmission Crossmember
- Manufacturer Note: FROM 09/08/03
- Base No.: 6A023
- Item Weight: 7.10 Pounds
- Item Dimensions: 9.3 x 8.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C7Z-6A023-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2002 Ford Excursion Motor Mount, Passenger Side
Part Number: 2C7Z-6038-BB
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Manufacturer Note: RH, 4x2
- Position: Passenger Side
- Replaces: 2C7Z-6038-BA
- Base No.: 6038
- Item Weight: 7.70 Pounds
- Item Dimensions: 9.3 x 8.3 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C7Z-6038-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2002 Ford Excursion Motor Mount, Passenger Side
Part Number: 2C7Z-6038-AC
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Manufacturer Note: RH, 4x2
- Position: Passenger Side
- Base No.: 6038
- Item Weight: 6.50 Pounds
- Item Dimensions: 9.2 x 8.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C7Z-6038-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
2002 Ford Excursion Rear Mount
Part Number: YC3Z-6068-BB
Product Specifications
- Other Name: Insulator Assembly - Engine; Manual Transmission Mount; Engine Mount Bracket; Motor Mount; Rear Support; Insulator Assembly - Engine Support
- Manufacturer Note: With damper asy. , 4x2
- Base No.: 6068
- Item Weight: 12.60 Pounds
- Item Dimensions: 9.5 x 8.4 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC3Z-6068-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2002 Ford Excursion Mount Bracket, Passenger Side
Part Number: F81Z-6030-CA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Base No.: 6030
- Item Weight: 4.20 Pounds
- Item Dimensions: 9.4 x 8.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6030-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
2002 Ford Excursion Rear Mount
Part Number: YC3Z-6068-BA
Product Specifications
- Other Name: Insulator Assembly - Engine; Automatic Transmission Mount; Engine Mount Bracket; Motor Mount; Rear Support; Insulator Assembly - Engine Support
- Manufacturer Note: 4x4
- Base No.: 6068
- Item Weight: 4.60 Pounds
- Item Dimensions: 9.3 x 8.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC3Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2002 Ford Excursion Mount Bracket, Passenger Side
Part Number: F81Z-6030-BA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Position: Passenger Side
- Base No.: 6030
- Item Weight: 6.30 Pounds
- Item Dimensions: 9.1 x 8.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6030-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL

2002 Ford Excursion Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Excursion Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Excursion Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Excursion Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount on 2002 Ford Excursion?
A: Service and repair of the transmission mount starts by hoisting the vehicle and uninstalling the nuts. Select a fitting transmission jack for the operation while avoiding excessive back-jack positions which could harm either TSS or OSS sensors. First you must raise the transmission off the rear crossmember support to remove the rear transmission mount and then remove its bolts and mount. Use caution when installing the transmission to prevent rising it higher than necessary in the back. Fully elevate the transmission before placing and screwing in the rear transmission mount. The transmission process includes lowering it onto the rear crossmember support while installing the nuts and removing the high-lift transmission jack followed by support removal before lowering the vehicle.