Other Name: Pump Assembly - Water; Engine Water Pump
Manufacturer Note: Engine Water Pump, Lightning, BEFORE 11-10-00
Base No.: 8501
Item Weight: 8.90 Pounds
Item Dimensions: 5.2 x 5.3 x 7.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: XL3Z-8501-BA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
2001 Ford F-150 Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford F-150 Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford F-150 Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford F-150 Water Pump Parts Q&A
Q: How to Service and Repair a Water Pump on 2001 Ford F-150?
A: A proper water pump repair requires removing the engine cooling fan together with fan shroud first and then disconnecting the drive belt and water pump pulley bolts. Engine repair on the 4.2L requires you to disconnect the upper radiator hose from the water pump component. You should begin by removing all water pump bolts after which you should pull out the water pump from its position on the cylinder block while making sure the mating surfaces remain clean. Lubricate the O-ring seal with engine coolant before placing the water pump onto the engine motor. Install the bolts loosely before executing the specified tightening order. Following placement of the water pump pulley onto the water pump you should loosely install its bolts while following the same bolt installation sequence. The 4.2L procedure requires installing the upper radiator hose onto the water pump and then adding the drive belt followed by the engine cooling fan and fan shroud.