Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
Replaces: F81Z-8501-FA, PW-455
Condition: New
Fitment Type: Direct Replacement
SKU: F81Z-8501-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following 2001 Ford F-250 Super Duty Submodels:
Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
2001 Ford F-250 Super Duty Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford F-250 Super Duty Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford F-250 Super Duty Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford F-250 Super Duty Water Pump Parts Q&A
Q: How to service and repair the water pump on gasoline engines on 2001 Ford F-250 Super Duty?
A: When repairing or servicing the water pump for gasoline vehicles start with draining the cooling system components. Start by taking away the engine cooling fan before removing the drive belt along with water pump pulley after detaching its bolts. Begin by removing the water pump pulley before you proceed to take out the bolts holding the water pump against the cylinder block and separate the water pump from its position. Surface inspection followed by cleaning must occur before any new installation. Apply Premium engine coolant E2FZ-19S49-AA (in Oregon F5FZ-19549-CC; in Canada CXC-8-B) or an equivalent that matches Ford specification ESE-M97B44-A onto the O-ring seal before putting it on the water pump. Insert the water pump into the engine block and fasten it with the bolts. follow the pulley installation by placing it on the water pump followed by bolt installation before fitting the accessory drive belt. Reinstall the fan and fan clutch before you put back the cooling system fluid.