Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
Replaces: F81Z-8501-FA, PW-455
Condition: New
Fitment Type: Direct Replacement
SKU: F81Z-8501-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following 2002 Ford F-250 Super Duty Submodels:
Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
2002 Ford F-250 Super Duty Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford F-250 Super Duty Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford F-250 Super Duty Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Ford F-250 Super Duty Water Pump Parts Q&A
Q: How to service and repair a water pump on 2002 Ford F-250 Super Duty?
A: You should start water pump servicing by draining the cooling system fluid. First remove the engine cooling fan after which you should take out the drive belt and the water pump pulley using bolt removal. Clean the mating surfaces while inspecting them following the detachment of the water pump from the cylinder block. It is essential to exercise caution during new water pump installation since different vehicles require either Motorcraft Premium Engine Coolant VC-4-A (green) which meets Ford specification ESE-M97B44-A or Motorcraft Premium Gold Engine Coolant VC-7-A (yellow) meeting Ford specification WSS-M97B51-A1 and coolant type mixing should be avoided. Before inserting the water pump into position, apply engine coolant to the newest O-ring seal and put the O-ring on the water pump before you secure it through engine block bolts. After placing the pulley onto the water pump install its bolts and then put on the accessory drive belt. After finishing install the fan together with fan clutch and operate the cooling system.