How to service and repair the wheel spindle on 2001 Ford Focus?

Start the wheel spindle service and repair work by letting the parking brake free before taking off the tire and wheel. The wheel speed sensor must be detached from vehicles that come with anti-lock brakes. Received any damage to the dust cap during removal you should replace it with a new one. A socket device should be used to remove the hub retaining nut in a controlled manner because this process should protect the ABS sensor ring from damage caused by metallic fragments. First remove the brake drum after taking out the hub retaining nut and then separate the wheel spindle. When installing the new wheel spindle always check that mating surfaces remain clean along with free from rust and foreign compounds. A socket should be used to install the hub retaining nut to avoid damage and the wheel speed sensor ring must be protected from knocks or damage while also staying free of metallic fragments when installing the brake drum. You must install the dust cap and reconnect the wheel speed sensor when dealing with anti-lock brake vehicles before reattaching both wheel and tire and adjusting the parking brake cable.

OEM 2001 Ford Focus Spindle

Axle Spindle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Spindles found

View related parts
2001 Ford Focus Spindle, Rear Part Number: 1M5Z-4A013-BA
$96.06 MSRP: $147.83
You Save: $51.77 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stub Axle, Rear
- Position: Rear
- Base No.: 4A013
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.2 x 4.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1M5Z-4A013-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2001 Ford Focus Spindle, Rear Part Number: 1M5Z-4A013-AA
Product Specifications
- Other Name: Stub Axle, Rear
- Position: Rear
- Base No.: 4A013
- Item Weight: 2.00 Pounds
- Item Dimensions: 4.1 x 4.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1M5Z-4A013-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2001 Ford Focus Spindle, Driver Side Part Number: 98AZ-4A013-BA
Product Specifications
- Position: Driver Side
- Base No.: 4A013
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.3 x 4.4 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 98AZ-4A013-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Focus Submodels:
- LX, S, SE, SES, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2001 Ford Focus Spindle, Passenger Side Part Number: 98AZ-4A013-AA
Product Specifications
- Position: Passenger Side
- Base No.: 4A013
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.2 x 4.3 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 98AZ-4A013-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Focus Submodels:
- LX, S, SE, SES, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2001 Ford Focus Spindle

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Focus Spindle available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Focus Spindle as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Focus Spindle Parts Q&A

Q: How to service and repair the wheel spindle on 2001 Ford Focus?
A: Start the wheel spindle service and repair work by letting the parking brake free before taking off the tire and wheel. The wheel speed sensor must be detached from vehicles that come with anti-lock brakes. Received any damage to the dust cap during removal you should replace it with a new one. A socket device should be used to remove the hub retaining nut in a controlled manner because this process should protect the ABS sensor ring from damage caused by metallic fragments. First remove the brake drum after taking out the hub retaining nut and then separate the wheel spindle. When installing the new wheel spindle always check that mating surfaces remain clean along with free from rust and foreign compounds. A socket should be used to install the hub retaining nut to avoid damage and the wheel speed sensor ring must be protected from knocks or damage while also staying free of metallic fragments when installing the brake drum. You must install the dust cap and reconnect the wheel speed sensor when dealing with anti-lock brake vehicles before reattaching both wheel and tire and adjusting the parking brake cable.