FordParts
My Garage
My Account
Cart
OEM 2001 Ford Mustang Brake Pads
Disc Brake Pad Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Brake Pads found
2001 Ford Mustang Brake Pads, Front Part Number: YU2Z-2V001-DA
$45.79 MSRP: $66.65You Save: $20.86 (32%)Product Specifications- Other Name: Pad; Disc Brake Pad Set, Front; Front Pads; Disc Brake Pad Set
- Position: Front
- Replaces: XR3Z-2001-AA, BRF-1491
- Base No.: 2001
- Item Weight: 4.60 Pounds
- Item Dimensions: 2.5 x 5.3 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YU2Z-2V001-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Mustang Brake Pads, Rear Part Number: 1U2Z-2V200-FA
$50.07 MSRP: $74.98You Save: $24.91 (34%)Product Specifications- Other Name: Kit - Brake Shoe And Lining; Disc Brake Pad Set, Rear; Rear Pads; Disc Brake Pad Set
- Manufacturer Note: Ford Retail Spec
- Position: Rear
- Replaces: F5ZZ-2200-A, F4ZZ-2200-A, XU2Z-2V200-MA, BRF-1489
- Base No.: 2200
- Item Weight: 2.10 Pounds
- Item Dimensions: 2.7 x 4.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1U2Z-2V200-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Kit - Brake Shoe And Hardware; Disc Brake Caliper, Rear Left; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Kit - Brake Shoe And Lining; Disc Brake Pad Set
- Manufacturer Note: Warranty Eligible
- Position: Rear Driver Side
- Base No.: 2200
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.7 x 4.1 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3R3Z-2200-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Mustang Brake Pads, Front Part Number: F5ZZ-2001-A
Product Specifications- Other Name: Kit - Brake Shoe; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Disc Brake Pad Set
- Position: Front
- Base No.: 2001
- Item Weight: 4.40 Pounds
- Item Dimensions: 4.3 x 5.1 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5ZZ-2001-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Mustang Brake Pads
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Mustang Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Mustang Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford Mustang Brake Pads Parts Q&A
- Q: How to service and repair the front brake pads on 2001 Ford Mustang?A: Start the front brake pad repair process by removing the brake master cylinder filler cap followed by checking the brake fluid in the reservoir and draining the liquid until reaching half capacity. The first step includes lifting the vehicle before removing the wheel along with its attached tire. Replacement pads are necessary when the worn thickness surpasses the specified measurement from the metal backing plate or rivets and new pads must be used in complete axle sets. Check pad condition by examining the caliper bolts before their removal while keeping guide pins fixed in position then dispose of the caliper bolts. It is crucial to avoid using the caliper sight hole for piston retraction since it can damage both the pistons along with their attached boots. Disc brake calipers must never depend on brake hoses for support because appropriate tools should be used to lift them from anchor plates. Check pad thickness before removing both pads as well as pad slippers. After that discard the slippers. A new brake disc needs installation when front brake disc thickness measurement shows it is outside the specified range. Checks on the disc brake caliper should be performed for any signs of leaks or boot damage which will require disassembly. Confirm the fitment of guide pins through the front disc brake anchor plate assembly while inspecting the guide pin boots for undamaged status and checking if guide pins display binding or damage symptoms; swap every defective guide pin. Before pad installation ensure pad lining stays free from pathway contact with grease, oil and brake fluid as well as pump in non-contaminated pads. The installation necessitates all hardware from pad kits such as new pad slippers and pads. A wood block or used pad should serve as protection for caliper pistons and boots during compression. To implement installation of the disc brake caliper it is essential to place the anti-rattle spring correctly within the caliper before securing the caliper to its position across the guide pins using stationary hands to avoid caliper bolt movement. Lower the vehicle while installing the wheel and tire assembly before filling the master cylinder brake reservoir with high-performance DOT 3 C6AZ-19542-AB brake fluid. Dress the brake master cylinder handle following the procedure. Finally, inspect the brake operation.