How to service the right-hand exhaust manifold on 2001 Ford Mustang?

Service of the right-hand exhaust manifold starts with disconnecting the battery negative cable then removing the air cleaner outlet tube. You should start by disconnecting the transducer electrical connector and then pull out the wiring harness from the push pin. The Exhaust Gas Recirculation (EGR) nut requires loosening before you extract the EGR tube from its place. The service process begins after hoisting the vehicle and removing the left-hand exhaust manifold flange nuts then moving to the right-hand exhaust manifold flange nuts removal. Before uninstalling the right-hand exhaust manifold you must lower the vehicle while throwing away the exhaust manifold gasket. Use the predetermined order to tighten nuts during installation steps then do the reverse of the removal steps.

OEM 2001 Ford Mustang Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Exhaust Manifolds found

View related parts
2001 Ford Mustang Exhaust Manifold
Part Number: 1R3Z-9430-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left, Right; Manifold
- Replaces: XR3Z-9430-AC
- Base No.: 9430A
- Item Weight: 7.60 Pounds
- Item Dimensions: 15.2 x 11.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1R3Z-9430-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Mustang Submodels:
- Base | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS
View related parts
2001 Ford Mustang Exhaust Manifold, Driver Side
Part Number: XR3Z-9431-BC
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Manufacturer Note: LH, #XR3E,9431,BC, with ETA BOSS (Electronic Thermactor Air) Cap N811244,S , with Calif. Ems.
- Position: Driver Side
- Base No.: 9431
- Item Weight: 7.10 Pounds
- Item Dimensions: 14.3 x 9.7 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XR3Z-9431-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Mustang Submodels:
- Base, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2001 Ford Mustang Exhaust Manifold, Passenger Side
Part Number: 1R3Z-9430-CA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Base No.: 9430
- Item Weight: 7.10 Pounds
- Item Dimensions: 14.7 x 11.8 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1R3Z-9430-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Mustang Submodels:
- Base, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2001 Ford Mustang Exhaust Manifold, Driver Side
Part Number: XR3Z-9431-FA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Manufacturer Note: LH, 2v
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 7.60 Pounds
- Item Dimensions: 17.0 x 10.2 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XR3Z-9431-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Mustang Submodels:
- GT, GT Bullitt | 8 Cyl 4.6 L GAS
View related parts
2001 Ford Mustang Exhaust Manifold, Driver Side
Part Number: XR3Z-9431-DC
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Manufacturer Note: LH, #XR3E-9431-DC, without ETA BOSS (Electronic Thermactor Air) Cap N811244-S, Except Calif. Ems.
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 7.00 Pounds
- Item Dimensions: 14.1 x 9.7 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XR3Z-9431-DC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Mustang Submodels:
- Base | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS
View related parts
2001 Ford Mustang Exhaust Manifold, Driver Side
Part Number: XR3Z-9431-CB
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Manufacturer Note: LH, 4V Cobra
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 12.30 Pounds
- Item Dimensions: 20.9 x 8.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XR3Z-9431-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Mustang Submodels:
- SVT Cobra | 8 Cyl 4.6 L GAS
View related parts
2001 Ford Mustang Exhaust Manifold, Passenger Side
Part Number: XR3Z-9430-FA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Manufacturer Note: RH, 2v
- Position: Passenger Side
- Base No.: 9430
- Item Weight: 12.20 Pounds
- Item Dimensions: 21.1 x 8.9 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XR3Z-9430-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Mustang Submodels:
- GT, GT Bullitt | 8 Cyl 4.6 L GAS
View related parts
2001 Ford Mustang Exhaust Manifold, Passenger Side
Part Number: XR3Z-9430-CC
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Manufacturer Note: RH, 4V Cobra
- Position: Passenger Side
- Base No.: 9430
- Item Weight: 12.20 Pounds
- Item Dimensions: 20.9 x 8.7 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XR3Z-9430-CC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Mustang Submodels:
- SVT Cobra | 8 Cyl 4.6 L GAS

2001 Ford Mustang Exhaust Manifold

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Mustang Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Mustang Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Mustang Exhaust Manifold Parts Questions & Experts Answers

Q: How to service the right-hand exhaust manifold on 2001 Ford Mustang?
A: Service of the right-hand exhaust manifold starts with disconnecting the battery negative cable then removing the air cleaner outlet tube. You should start by disconnecting the transducer electrical connector and then pull out the wiring harness from the push pin. The Exhaust Gas Recirculation (EGR) nut requires loosening before you extract the EGR tube from its place. The service process begins after hoisting the vehicle and removing the left-hand exhaust manifold flange nuts then moving to the right-hand exhaust manifold flange nuts removal. Before uninstalling the right-hand exhaust manifold you must lower the vehicle while throwing away the exhaust manifold gasket. Use the predetermined order to tighten nuts during installation steps then do the reverse of the removal steps.