How to service the rear Sway Bar Kit on 2001 Ford Ranger?

Service of the rear sway bar kit starts by raising the vehicle and placing safety stands in position. Proceed by taking off the wheel along with the tire. The front of the service starts with unbolting the rear sway bar kit link nuts and joint before removing the rear sway bar kit link. Proceed by extracting every bolt from the sway bar kit mounting brackets and then eliminate the brackets. Last in the procedure is the removal of the rear sway bar kit. The reverse steps from removal need to be carried out for installation.

OEM 2001 Ford Ranger Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Kits found

View related parts
2001 Ford Ranger Stabilizer Bar, Front Part Number: F87Z-5482-CA
$69.10 MSRP: $85.47
You Save: $16.37 (20%)
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Base No.: 5482
- Item Weight: 20.40 Pounds
- Item Dimensions: 48.0 x 9.5 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-5482-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2001 Ford Ranger Stabilizer Bar, Front Part Number: F87Z-5482-DA
$91.51 MSRP: $126.59
You Save: $35.08 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: Stabilizer, 4x4,
- Position: Front
- Base No.: 5482
- Item Weight: 21.90 Pounds
- Item Dimensions: 55.1 x 17.2 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-5482-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2001 Ford Ranger Stabilizer Bar, Front Part Number: F87Z-5482-BD
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: F87Z-5482-BA
- Base No.: 5482
- Item Weight: 12.70 Pounds
- Item Dimensions: 44.6 x 14.9 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-5482-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2001 Ford Ranger Sway Bar Kit

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Ranger Sway Bar Kit available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Ranger Sway Bar Kit as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Ranger Sway Bar Kit Parts Q&A

Q: How to service the rear Sway Bar Kit on 2001 Ford Ranger?
A: Service of the rear sway bar kit starts by raising the vehicle and placing safety stands in position. Proceed by taking off the wheel along with the tire. The front of the service starts with unbolting the rear sway bar kit link nuts and joint before removing the rear sway bar kit link. Proceed by extracting every bolt from the sway bar kit mounting brackets and then eliminate the brackets. Last in the procedure is the removal of the rear sway bar kit. The reverse steps from removal need to be carried out for installation.