How to service and repair the timing cover on 2001 Ford Ranger?

Service and repair of the timing cover requires first removing the battery ground cable while replacing the bolts securing the fan shroud before placement out of the way. Begin by loosening the bolts on the water pump pulley but keep the bolts installed before removing the drive belt. The procedure demands that you unscrew all the bolts which hold the fan and clutch assembly and water pump pulley together. The technician must recover refrigerant from the air conditioning system before disconnecting the A/C wiring connector. First find the mounting bracket of the A/C compressor before you detach the power steering pump with the mounting bracket and set them aside. Unscrewing the screw and releasing the interlocking tabs will permit you to remove the outer timing belt cover. The A/C compressor mounting bracket installation requires you to start by following the removal procedures and secure it with three bolts and one stud while tightening all fasteners to specified torque settings of M10 bolts and stud at 48 Nm (35 ft. lbs.) and Me bolt at 25 Nm (18 ft. lbs.).

OEM 2001 Ford Ranger Timing Cover

Engine Timing Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Timing Covers found

View related parts
2001 Ford Ranger Timing Cover, Front Part Number: 5L2Z-6019-AA
$63.86 MSRP: $92.95
You Save: $29.09 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover - Cylinder Front; Engine Timing Cover; Front Cover
- Position: Front
- Replaces: 1L2Z-6019-AA, F77Z-6019-AD
- Base No.: 6019
- Item Weight: 5.60 Pounds
- Item Dimensions: 14.3 x 13.1 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-6019-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2001 Ford Ranger Timing Cover, Front Part Number: 1L5Z-6019-AA
$116.79 MSRP: $170.00
You Save: $53.21 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Cylinder Front; Engine Timing Cover; Front Cover
- Manufacturer Note: Use RTV Silicone Sealer In Place Of Gasket For This Application. Refer To Workshop Manual For Specification
- Position: Front
- Base No.: 6019
- Item Weight: 6.80 Pounds
- Item Dimensions: 4.4 x 22.0 x 14.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-6019-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2001 Ford Ranger Timing Cover, Front Inner Part Number: F57Z-6019-C
$121.37 MSRP: $176.67
You Save: $55.30 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Timing Belt; Engine Timing Cover, Inner
- Manufacturer Note: Inner cover
- Position: Front Inner
- Base No.: 6019
- Item Weight: 2.20 Pounds
- Item Dimensions: 14.6 x 14.0 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F57Z-6019-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Splash, Sport, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
2001 Ford Ranger Timing Cover Part Number: F5DZ-6019-A
Product Specifications
- Other Name: Cover - Front; Engine Timing Cover; Front Cover
- Replaces: FODZ-6019-C, F3DZ-6019-A, F4DZ-6019-AFFV
- Base No.: 6019
- Item Weight: 4.40 Pounds
- Item Dimensions: 2.9 x 13.1 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5DZ-6019-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Custom, Edge, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2001 Ford Ranger Timing Cover, Front Outer Part Number: F57Z-6019-B
Product Specifications
- Other Name: Cover - Cylinder Front; Engine Timing Cover, Outer
- Manufacturer Note: Aluminum front seal retainer.
- Position: Front Outer
- Base No.: 6019
- Item Weight: 1.40 Pounds
- Item Dimensions: 14.4 x 14.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F57Z-6019-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Splash, Sport, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS

2001 Ford Ranger Timing Cover

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Ranger Timing Cover available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Ranger Timing Cover as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Ranger Timing Cover Parts Q&A

Q: How to service and repair the timing cover on 2001 Ford Ranger?
A: Service and repair of the timing cover requires first removing the battery ground cable while replacing the bolts securing the fan shroud before placement out of the way. Begin by loosening the bolts on the water pump pulley but keep the bolts installed before removing the drive belt. The procedure demands that you unscrew all the bolts which hold the fan and clutch assembly and water pump pulley together. The technician must recover refrigerant from the air conditioning system before disconnecting the A/C wiring connector. First find the mounting bracket of the A/C compressor before you detach the power steering pump with the mounting bracket and set them aside. Unscrewing the screw and releasing the interlocking tabs will permit you to remove the outer timing belt cover. The A/C compressor mounting bracket installation requires you to start by following the removal procedures and secure it with three bolts and one stud while tightening all fasteners to specified torque settings of M10 bolts and stud at 48 Nm (35 ft. lbs.) and Me bolt at 25 Nm (18 ft. lbs.).