How to service and repair the Vehicle Speed Sensor on the Output Shaft on 2001 Ford Taurus?

Vehicle servicing of the Output Shaft Speed (OSS) Sensor starts with disconnecting the battery ground cable followed by hoisting the vehicle in the air. Mechanic wire needs to support the exhaust system before you take out the nuts which will allow you to disconnect the three-way catalytic converter from its dual converter Y-pipe. Start by unplugging the OSS sensor connector before you uninstall both the OSS sensor connector and bolt then remove the OSS sensor cover. Finally, remove the OSS sensor. The end of the installation requires you to perform the reverse steps from the removal stage.

OEM 2001 Ford Taurus Vehicle Speed Sensor

VSS

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vehicle Speed Sensor found

View related parts
2001 Ford Taurus Speed Sensor
Part Number: YF1Z-7H103-AA
$169.23 MSRP: $230.30
You Save: $61.07 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Output Shaft; Vehicle Speed Sensor; Sensor - Output Shaft Speed
- Manufacturer Note: Sensor - OSS, 1F2P-C*
- Base No.: 7H103
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.7 x 7.9 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-7H103-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2001 Ford Taurus Vehicle Speed Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Taurus Vehicle Speed Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Taurus Vehicle Speed Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Taurus Vehicle Speed Sensor Parts Questions & Experts Answers

Q: How to service and repair the Vehicle Speed Sensor on the Output Shaft on 2001 Ford Taurus?
A: Vehicle servicing of the Output Shaft Speed (OSS) Sensor starts with disconnecting the battery ground cable followed by hoisting the vehicle in the air. Mechanic wire needs to support the exhaust system before you take out the nuts which will allow you to disconnect the three-way catalytic converter from its dual converter Y-pipe. Start by unplugging the OSS sensor connector before you uninstall both the OSS sensor connector and bolt then remove the OSS sensor cover. Finally, remove the OSS sensor. The end of the installation requires you to perform the reverse steps from the removal stage.