How to service and repair a cellular phone antenna on 2001 Mercury Sable?

To service/repair the vehicle cellular antenna: unplug the base cable, slice the two-way tape holding the base to the glass and do not attempt to pry it off in order to break the glass. Installation requires cleaning up of glass and base surfaces, stick a two-way tape, make sure that the inside/outside bases are in place, fasten to the glass, and reconnect the cable.

OEM 2001 Mercury Sable Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Antenna found

View related parts
2001 Mercury Sable Antenna Mast Part Number: F6DZ-18A886-AB
Product Specifications
- Other Name: Rod Assembly - Replacement - Aerial; Radio Antenna Mast
- Manufacturer Note: Radio antenna mast assembly, with power antenna
- Base No.: 18A886
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 19.4 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6DZ-18A886-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Mercury Sable Submodels:
- G, GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2001 Mercury Sable Antenna

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Mercury Sable Antenna available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Mercury Sable Antenna as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Mercury Sable Antenna Parts Q&A

Q: How to service and repair a cellular phone antenna on 2001 Mercury Sable?
A: To service/repair the vehicle cellular antenna: unplug the base cable, slice the two-way tape holding the base to the glass and do not attempt to pry it off in order to break the glass. Installation requires cleaning up of glass and base surfaces, stick a two-way tape, make sure that the inside/outside bases are in place, fasten to the glass, and reconnect the cable.