OEM 2001 Mercury Villager Brake Master Cylinder

2001 Mercury Villager Brake Master Cylinder Parts Questions & Experts Answers

• Q: How to bleed the brake master cylinder in on 2001 Mercury Villager?

  A: Short brake hoses should be installed for bleeding the brake master cylinder in-vehicle while positioning their ends inside the brake master cylinder reservoir. Use High Performance DOT 3 Brake Fluid C6AZ-19542-AB that fulfills Ford specification ESA-M6C25-A, DOT 3 as the fluid for the reservoir. Your assistant should operate the brake pedal until brake fluid appears from both hoses without bubbles. First disconnect the short brake hoses before you install brake outlet lines and replace the brake master cylinder reservoir with High Performance DOT 3 Brake Fluid C6AZ-19542-AB or another product equivalent to Ford specification ESA-M6C25-A, DOT 3. It is vital to keep the brake master cylinder reservoir at all times filled while changing brake fluid and to discard waste fluid because discarded fluid harms painted and plastic materials. Spilled brake fluid requires immediate removal through water washing. The hydraulic system's integrity can be compromised by air intrusion upon disconnecting any component so brake system bleeding becomes necessary after completing proper repairs. You need to maintain caution while dealing with brake fluid because polyglycol ethers and polyglycols within it can lead to eye irritation and ingestion injuries.