FordParts
My Garage
My Account
Cart
OEM 2001 Mercury Villager Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Parking Brake Cables found
Product Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable asy. - RH - 1999/
- Position: Passenger Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 11.9 x 8.8 x 19.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF5Z-2A635-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Mercury Villager Front Cable Part Number: XF5Z-2853-CA
Product Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable asy. - front - 2000/ - From 10/27/99
- Item Weight: 1.60 Pounds
- Item Dimensions: 11.9 x 8.8 x 19.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF5Z-2853-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable asy. - LH - 1994/
- Position: Driver Side
- Item Weight: 2.80 Pounds
- Item Dimensions: 11.6 x 8.7 x 19.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F4XY-2A635-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Mercury Villager Parking Brake Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Mercury Villager Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Mercury Villager Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Mercury Villager Parking Brake Cable Parts Q&A
- Q: How to service and repair the front parking brake cable on 2001 Mercury Villager?A: Service and repair operations on the front parking brake cable begin with elevating and supporting the vehicle. Start service on the front parking brake cable by uninstalling the parking brake adjustment nut from the equalizer along with the removal of front seating. Begin with taking away the right and left scuff plates and then handle removal of the right and left A-pillar lower trim panels. Unscrew the four pin-type retainers situated on the console cover to make removal possible. You must now disassemble the accelerator stopper cover by unscrewing its accelerator stopper screw. Take out the carpet from the floor and then detach the heat duct cover by unfastening all ten nuts. To detach the front parking brake cable from the parking brake control you must first eliminate the front parking brake cable slug and next you should depress the parking brake cable end lock tabs. To begin replace the front parking brake cable hold-down bracket bolt then remove the parking brake cable by disassembling cable hold-down bracket nuts followed by pulling the grommet through. The installation process requires performing the removal steps in reverse order.