Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Mercury Villager Submodels:
Base, Estate, GS, LS, Nautica, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Mercury Villager Submodels:
Base, Estate, GS, LS, Nautica, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
2001 Mercury Villager Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Mercury Villager Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Mercury Villager Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Mercury Villager Headlight Bulb Parts Q&A
Q: How to service the headlight bulb on 2001 Mercury Villager?
A: The first step is disconnecting the electrical connector and rotating the headlamp bulb retainer counterclockwise for one-eighth turn to access the bulb which should be handled only by its base due to gas pressure inside the glass envelope. It is essential to grip the bulb base only because the enclosed gas inside the glass end can break if the bulb receives damage. Remove the bulb from the headlamp right before installing a new one because exposing it longer leads to performance reduction while contaminants enter the unit. Start work only when the headlamp switch and ignition switch show OFF status. To install the headlamp bulb place it inside the housing then secure it with a clockwise one-eighth turn rotation of the retainer and reattach the electrical connector.