FordParts
My Garage
My Account
Cart
OEM 2002 Mercury Villager Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Parking Brake Cables found
Product Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable asy. - RH - 1999/
- Position: Passenger Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 11.9 x 8.8 x 19.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF5Z-2A635-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Mercury Villager Front Cable Part Number: XF5Z-2853-CA
Product Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable asy. - front - 2000/ - From 10/27/99
- Item Weight: 1.60 Pounds
- Item Dimensions: 11.9 x 8.8 x 19.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF5Z-2853-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable asy. - LH - 1994/
- Position: Driver Side
- Item Weight: 2.80 Pounds
- Item Dimensions: 11.6 x 8.7 x 19.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F4XY-2A635-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Mercury Villager Parking Brake Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Mercury Villager Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Mercury Villager Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Mercury Villager Parking Brake Cable Parts Q&A
- Q: How to service and repair the rear parking brake cable and conduit on 2002 Mercury Villager?A: The procedure to maintain the rear parking brake cable and conduit starts by lifting the vehicle with support followed by brake drum removal. You need to remove the primary brake shoe after eliminating the brake shoe hold-down spring along with the lower retracting spring and upper retracting spring and brake shoe adjusting lever. Service personnel should remove the rear parking brake cable and conduit from the parking brake cable equalizer by first loosening the parking brake cable adjustment nut then disconnecting the cable from the equalizer. Afterward detach the EVAP canister shield by removing all bolts and pin-type retainers. Start by removing bolts that keep the rear parking brake cable and conduit in place against front and middle hold-down brackets while adding to the step of unbolting the rear hold-down bracket. The rear parking brake cable and conduit must be detached from the parking brake lever then the lock tabs need to be depressed to extract cable and conduit through the backing plate. The installation should begin with reversing the removal steps while properly adjusting the parking brake cable and conduit configuration.