FordParts
My Garage
My Account
Cart
OEM 2001 Mercury Villager Water Pump
H2O Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Water Pump found
2001 Mercury Villager Water Pump Part Number: XF5Z-8501-BA
$22.91 MSRP: $31.69You Save: $8.78 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Base No.: 8501
- Item Weight: 4.40 Pounds
- Item Dimensions: 3.9 x 5.7 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF5Z-8501-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Mercury Villager Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Mercury Villager Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Mercury Villager Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Mercury Villager Water Pump Parts Q&A
- Q: How to service and repair the water pump on 2001 Mercury Villager?A: You should drain the engine cooling system at the beginning before servicing or repairing the water pump. An initial step entails removing the crankshaft pulley together with the water pump pulley through bolt extraction. The service begins with removing the six bolts that hold the lower timing belt cover and lowering the vehicle down. The upper radiator hose needs detaching by first eliminating its bolt then loosening clamps to access the coolant bypass hose that needs its clamps released. The A/C compressor idler pulley and bracket need to be removed after unbolted the required pieces. The wiring harness should be set aside through unclipping while the technician disconnects the vacuum reservoir vacuum hose. The main wire harness must be unclipped for repositioning while setting aside another wire harness together with the wire harness bracket containing an unclipped spark plug wire without its bolt. The PCV breather hoses and tube need removal after both clamps release and the bolt extraction. Seven bolts securing the upper timing belt cover need removal before you remove both the upper and lower timing belt covers. When the stud is removed mark its position before removing the six bolts from the water pump. The water pump mounting surface requires a 2.0 - 3.0mm (0.079 - 0.118 inch) bead of Silicone Gasket and Sealant F7AZ-19554-EA which meets Ford Specification WSK-M2G343-A4 before following the reverse installation process.