Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2001 Mercury Villager Thermostat Housing

Engine Coolant Thermostat Housing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat Housing found

  • 2001 Mercury Villager Thermostat Housing - F4XZ-8592-BA
    2001 Mercury Villager Thermostat Housing Diagram - F4XZ-8592-BA
    View related parts

    2001 Mercury Villager Thermostat Housing Part Number: F4XZ-8592-BA

    Product Specifications
    • Other Name: Connection - Water Outlet; Thermostat Housing Cover
    • Base No.: 8592
    • Item Weight: 1.30 Pounds
    • Item Dimensions: 5.6 x 4.4 x 4.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: F4XZ-8592-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2001 Mercury Villager Submodels:
    • Base, Estate, GS, LS, Nautica, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

2001 Mercury Villager Thermostat Housing

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Mercury Villager Thermostat Housing available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Mercury Villager Thermostat Housing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Mercury Villager Thermostat Housing Parts Q&A

  • Q: How to service and repair the thermostat housing on 2001 Mercury Villager?
    A: The procedure for thermostat housing repair starts with cool system draining combined with upper radiator hose removal; this process requires removing bolt clamp and hose clamps before hose detachment. Start by detaching the water bypass hose through the removal of its clamps followed by hose removal. You must begin by removing the thermostat housing by unscrewing its bolts then taking away the housing unit. The installation process should include new hose clamps only while confirming proper seating of all clamps. Maintenance of cleanliness on the thermostat housing and its mating surface free of dirt together with old silicone requires immediate attention. Fill the water pump mounting surface with a 0.079 - 0.118 inch (2.0 - 3.0 mm) bead of Silicone Gasket and Sealant F7AZ-19554-EA or a similar product that corresponds to Ford specification WSK-M2G343-A4. After concluding the installation follow the reverse procedure.

Related 2001 Mercury Villager Parts

Alternate Year Models

+
2000 Mercury Villager Thermostat Housing 2002 Mercury Villager Thermostat Housing