FordParts
My Garage
My Account
Cart
OEM 2002 Ford E-150 Econoline Differential Cover
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Differential Covers found
2002 Ford E-150 Econoline Axle Cover, Rear Part Number: F4TZ-4033-A
$24.50 MSRP: $35.67You Save: $11.17 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cover; Differential Cover, Rear; Rear Cover
- Position: Rear
- Base No.: 4033
- Item Weight: 3.10 Pounds
- Item Dimensions: 3.3 x 14.3 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F4TZ-4033-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Ford E-150 Econoline Differential Cover, Rear Part Number: BL3Z-4033-C
$35.13 MSRP: $49.83You Save: $14.70 (30%)Ships in 1 Business DayProduct Specifications- Other Name: Cover; Differential Cover, Rear; Axle Cover; Rear Cover
- Position: Rear
- Replaces: BL3Z-4033-A, F75Z-4033-AA
- Item Weight: 5.70 Pounds
- Item Dimensions: 5.5 x 15.7 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BL3Z-4033-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Ford E-150 Econoline Differential Cover
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford E-150 Econoline Differential Cover available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford E-150 Econoline Differential Cover as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Ford E-150 Econoline Differential Cover Parts Q&A
- Q: How to service and repair the differential cover on a Dana 60 or 70 rear drive axle on 2002 Ford E-150 Econoline?A: The maintenance process for restoring the differential cover under Dana 60 or 70 rear drive axles should start with vehicle elevation using a hoist or jack stand with safety positioning under the frame rails for dropping the rear axle into the working clearance position. Begin the differential housing cover service by draining the lubricant while removing the cover and cleaning both the differential housing cover and housing surfaces from gasket material. Use a suitable solvent to remove oil film from the differential housing cover surfaces along with the housing surfaces. You should install the differential housing cover immediately while it is within 15 minutes of applying silicone rubber sealant because delayed installation will require fresh sealant. Begin installation of the differential housing cover with two bolts at eight o'clock and two o'clock positions before installing all remaining bolts and tightening them by alternating between each bolt equally. Heat a torque screwdriver to 160 degrees F before tightening Grade 5 bolts until they reach 47 Nm (35 ft. lbs.) and Grade 8 bolts to 61 Nm (45 ft. lbs.). You need to wait for one hour before the specified lubricant addition to the axle then drop the vehicle into position.