OEM 2002 Ford Escape Brake Booster

2002 Ford Escape Brake Booster Parts Questions & Experts Answers

• Q: How to service and repair the vacuum brake booster on 2002 Ford Escape?

  A: The repair and servicing process for the vacuum brake booster begins with removing both the brake pedal push rod cotter pin along with the washer followed by unfastening the four nuts securing the power brake booster pushrod bracket. Disconnection of the brake pedal pushrod must be the next step. It is necessary to detach the Evaporative Emission Canister Purge Valve from vehicles equipped with a 3.0 L (4V) engine while ensuring secure storage of this component together with cable locator disconnect and nut removal. Begin by putting the purge valve to the side then remove its nuts to separate the master cylinder which will remain set aside. Unplug the vacuum hose before removing the brake booster through the correct eradication procedures. During installation one should perform the installation steps in the opposite order of the removal procedures.