How to service the catalytic converter on a 2.0L Zetec engine on 2002 Ford Escape?

Start your service procedure of the 2.0L Zetec catalytic converter by disconnecting the heat shield and all its retaining bolts. Service begins by removing both Heated Oxygen Sensor (HO2S) and Exhaust Gas Recirculation (EGR) tube from their positions. Begin the catalytic converter service by eliminating the nuts from the installation while throwing them out afterward. Proceed to detach the catalyst monitor sensor. Afterward remove the bolts together with additional nuts and dispose of them. Start by loosening all nuts on the catalytic converter bracket and proceed to remove the catalytic converter. You should position the new catalytic converter on the vehicle with fresh gaskets before tightening it with fresh bolts and nuts. After installing the catalyst monitor sensor you must tighten the catalytic converter bracket nuts while you fasten new converter nuts to the system. After completing installation the EGR tube and placing back the HO2S and securing bolts and heat shield, reconnect the catalytic converter bracket and bolts.

OEM 2002 Ford Escape Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Catalytic Converters found

View related parts
2002 Ford Escape Exhaust Manifold, Driver Side
Part Number: 5L8Z-5G232-EA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Catalytic Converter with Integrated Exhaust Manifold; Manifold Converter; Manifold
- Position: Driver Side
- Base No.: 9430A
- Item Weight: 13.40 Pounds
- Item Dimensions: 18.9 x 14.6 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-5G232-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 6 Cyl 3.0 L GAS
View related parts
2002 Ford Escape Exhaust Manifold, Passenger Side
Part Number: 5L8Z-5G232-CC
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold; Manifold Converter; Manifold
- Position: Passenger Side
- Base No.: 9430B
- Item Weight: 19.70 Pounds
- Item Dimensions: 17.4 x 13.6 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-5G232-CC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 6 Cyl 3.0 L GAS
View related parts
2002 Ford Escape Catalytic Converter
Part Number: 2L8Z-5E212-BA
Product Specifications
- Other Name: Converter Assembly; Converter
- Replaces: 2L8Z-5E212-AA
- Base No.: 5E212
- Item Weight: 13.70 Pounds
- Item Dimensions: 14.7 x 11.1 x 18.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L8Z-5E212-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escape Submodels:
- Limited, XLS, XLT | 6 Cyl 3.0 L GAS
View related parts
2002 Ford Escape Exhaust Manifold, Passenger Side
Part Number: YL8Z-5G232-DA
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold; Manifold Converter; Manifold
- Position: Passenger Side
- Base No.: 9430B
- Item Weight: 10.60 Pounds
- Item Dimensions: 14.4 x 12.6 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-5G232-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escape Submodels:
- Limited, XLS, XLT | 6 Cyl 3.0 L GAS
View related parts
2002 Ford Escape Exhaust Manifold, Driver Side
Part Number: YL8Z-5G232-AA
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold; Manifold Converter; Manifold
- Position: Driver Side
- Base No.: 9430A
- Item Weight: 12.50 Pounds
- Item Dimensions: 18.5 x 14.6 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-5G232-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escape Submodels:
- Limited, XLS, XLT | 6 Cyl 3.0 L GAS
View related parts
2002 Ford Escape Catalytic Converter
Part Number: YL8Z-5E212-GB
Product Specifications
- Other Name: Converter Assembly; Converter
- Base No.: 5E212
- Item Weight: 18.40 Pounds
- Item Dimensions: 16.4 x 13.5 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-5E212-GB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS
View related parts
2002 Ford Escape Catalytic Converter
Part Number: YL8Z-5E212-AA
Product Specifications
- Other Name: Converter Assembly; Converter
- Base No.: 5E212
- Item Weight: 11.90 Pounds
- Item Dimensions: 16.6 x 13.5 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-5E212-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Escape Submodels:
- Limited, XLS, XLT | 6 Cyl 3.0 L GAS

2002 Ford Escape Catalytic Converter

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Escape Catalytic Converter available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Escape Catalytic Converter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Escape Catalytic Converter Parts Questions & Experts Answers

Q: How to service the catalytic converter on a 2.0L Zetec engine on 2002 Ford Escape?
A: Start your service procedure of the 2.0L Zetec catalytic converter by disconnecting the heat shield and all its retaining bolts. Service begins by removing both Heated Oxygen Sensor (HO2S) and Exhaust Gas Recirculation (EGR) tube from their positions. Begin the catalytic converter service by eliminating the nuts from the installation while throwing them out afterward. Proceed to detach the catalyst monitor sensor. Afterward remove the bolts together with additional nuts and dispose of them. Start by loosening all nuts on the catalytic converter bracket and proceed to remove the catalytic converter. You should position the new catalytic converter on the vehicle with fresh gaskets before tightening it with fresh bolts and nuts. After installing the catalyst monitor sensor you must tighten the catalytic converter bracket nuts while you fasten new converter nuts to the system. After completing installation the EGR tube and placing back the HO2S and securing bolts and heat shield, reconnect the catalytic converter bracket and bolts.