Other Name: Housing - Thermostat; Thermostat Housing Cover
Base No.: 8592
Item Weight: 2.20 Pounds
Item Dimensions: 5.4 x 4.3 x 5.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F8RZ-8592-AG
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2002 Ford Escort Submodels:
ZX2, ZX2 Cool Coupe, ZX2 Hot Coupe, ZX2 S/R | 4 Cyl 2.0 L GAS
2002 Ford Escort Thermostat Housing
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Escort Thermostat Housing available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Escort Thermostat Housing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Ford Escort Thermostat Housing Parts Q&A
Q: How to service the thermostat housing for the 2.0L SPI engine on 2002 Ford Escort?
A: You need to disconnect the battery ground cable prior to starting the thermostat housing service procedure for the 2.0L SPI engine. Additionally you must remove the air cleaner outlet tube first. Lower the engine coolant below the water thermostat level before you disconnect the electrical connections of the water temperature indicator sender unit and the engine coolant temperature sensor. You must begin the water thermostat servicing by detaching both the upper radiator hose and heater coolant hose from the water thermostat housing. Begin the procedure by removing water thermostat housing bolts then taking out the housing combined with its attached water thermostat. Installation requires proper engagement between the water thermostat tabs and thermostat housing slots together with complete removal of old material from gasket surfaces. Reinstall the new components by performing all the removal steps in reverse order and complete the cooling system filling process afterward. Check for leaks at all connecting hoses while inspecting the engine with starting power and wait for the water thermostat to fully open before continuing. Finish the engine operation and complete the cooling reservoir with coolant until the minimum cold fill mark is reached.