FordParts
My Garage
My Account
Cart
OEM 2003 Ford Escort Thermostat Housing
Engine Coolant Thermostat Housing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Thermostat Housings found
2003 Ford Escort Thermostat Housing, Lower Part Number: XS7Z-8592-AD
Product Specifications- Other Name: Housing - Thermostat; Engine Coolant Thermostat Housing, Lower; Thermostat Housing Cover
- Position: Lower
- Replaces: XS7Z-8592-AC
- Base No.: 8592
- Item Weight: 3.60 Pounds
- Item Dimensions: 15.8 x 10.8 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XS7Z-8592-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Escort Thermostat Outlet Part Number: XS4Z-8592-TB
Product Specifications- Other Name: Connection Water Outlet; Thermostat Housing Cover; Thermostat Housing; Connection - Water Outlet
- Manufacturer Note: Connector, DOHC
- Base No.: 8592
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.7 x 7.6 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XS4Z-8592-TB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Escort Thermostat Housing
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Escort Thermostat Housing available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Escort Thermostat Housing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Escort Thermostat Housing Parts Q&A
- Q: How to service the thermostat housing on 2003 Ford Escort?A: The engine coolant service requires draining it below the water thermostat. The technician should disconnect the water temperature sensor connector followed by Crankshaft Position (CKP) sensor connector and ignition coil connector. The upper radiator hose should be separated from the thermostat housing. The two bolts and securing nut must be taken out from the thermostat housing. The new thermostat housing installation requires complete removal of gasket material from all surfaces before performing the steps in reverse order. The procedure following installation demands a cooling system refill and engine start-up for leak detection of all cooling components. After the water thermostat opens due to engine temperature rise stop the engine and fill the coolant recovery reservoir to keep the cold fill level at minimum.