How to service the rear ABS sensor on 2002 Ford Expedition?

The service of rear ABS sensor begins with supporting and raising the vehicle. Clean off surrounding debris from the rear anti-lock brake sensor before performing any removal steps. Start by disconnecting the rear anti-lock brake sensor electrical connector and followed by removing the bolt securing the sensor before removing the sensor itself. A complete cleaning of the mounting surface must follow removal procedures while checking the antilock brake sensor O-ring for damage. Lightly coat the O-ring with SAE-75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B which matches Ford specification WSL-M2C192-A or another equivalent product. The installation process ends by performing the steps that were used for removal in reverse order.

OEM 2002 Ford Expedition ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Sensors found

View related parts
2002 Ford Expedition Speed Sensor, Front Driver Side
Part Number: XL3Z-2C204-CB
$139.23 MSRP: $229.09
You Save: $89.86 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front, Front Left, Front Right; ABS Sensor; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Base No.: 2C204
- Item Weight: 1.20 Pounds
- Item Dimensions: 15.6 x 11.1 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XL3Z-2C204-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2002 Ford Expedition Speed Sensor, Front Passenger Side
Part Number: XL3Z-2C204-BC
$53.26 MSRP: $87.64
You Save: $34.38 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Right; ABS Speed Sensor; ABS Sensor; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Base No.: 2C204
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.9 x 3.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-2C204-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2002 Ford Expedition Speed Sensor, Front Driver Side
Part Number: XL3Z-2C205-AC
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left; ABS Speed Sensor; ABS Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: LH, 4x2, FROM 6/26/98
- Position: Front Driver Side
- Base No.: 2C205
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.7 x 7.8 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-2C205-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2002 Ford Expedition ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Expedition ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Expedition ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Expedition ABS Sensor Parts Questions & Experts Answers

Q: How to service the rear ABS sensor on 2002 Ford Expedition?
A: The service of rear ABS sensor begins with supporting and raising the vehicle. Clean off surrounding debris from the rear anti-lock brake sensor before performing any removal steps. Start by disconnecting the rear anti-lock brake sensor electrical connector and followed by removing the bolt securing the sensor before removing the sensor itself. A complete cleaning of the mounting surface must follow removal procedures while checking the antilock brake sensor O-ring for damage. Lightly coat the O-ring with SAE-75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B which matches Ford specification WSL-M2C192-A or another equivalent product. The installation process ends by performing the steps that were used for removal in reverse order.