How to service and repair the engine mounts on all on 2002 Ford Explorer?

The procedure for servicing and repairing engine support insulators on all vehicles requires disconnecting the battery ground cable followed by upper radiator fan shroud removal. Entering maintenance on the engine support insulators begins with lifting the vehicle onto a hoist after removing nuts from the right side motor mount. The first service starts by allowing both transmission-to-crossmember nuts to loosen and then removing nuts from the right side and left side stabilizer bars. Correct service and repair of 4X4 vehicle axle housing bushings begins with extracting the right side bolt followed by removal of left side lower and upper axle housing bushings. All vehicles require removal of the left front tire before proceeding to take off the right lower mount nut followed by its washer then the left lower mount nut with its washer. Start by taking out the bolt from the left side motor mount before inserting an appropriate jack to lift the right engine side. This will create enough space to remove the right motor mount followed by taking out the right side motor mount. The engine lifting process will be repeated to remove the left motor mount by lifting the engine from its left side. The installation ends when you perform the reverse procedure of removal.

OEM 2002 Ford Explorer Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Engine Mounts found

View related parts
2002 Ford Explorer Transmission Mount Part Number: 5L2Z-6068-AA
$73.63 MSRP: $101.85
You Save: $28.22 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Replaces: 1L2Z-6068-AA
- Base No.: 6068
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-6068-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, Postal, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2002 Ford Explorer Motor Mount Bracket Part Number: 5L2Z-6031-BA
$22.74 MSRP: $31.46
You Save: $8.72 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Motor Mount; Bracket - Engine Mounting; Engine Mount Bracket
- Base No.: 6031
- Item Weight: 3.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-6031-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
2002 Ford Explorer Motor Mount, Passenger Side Part Number: 7A2Z-6038-D
$70.30 MSRP: $102.33
You Save: $32.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Engine Mount
- Position: Passenger Side
- Replaces: 5L2Z-6038-AD, 7A2Z-6038-B, 5L2Z-6038-BB, 5L2Z-6038-AB, 6L2Z-6038-AB, 5L2Z-6038-BD
- Base No.: 6038A
- Item Weight: 4.60 Pounds
- Item Dimensions: 7.0 x 5.6 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A2Z-6038-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, Postal, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2002 Ford Explorer Transmission Mount Part Number: 5L2Z-6068-CA
$64.37 MSRP: $89.05
You Save: $24.68 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Replaces: 1L2Z-6068-CA
- Base No.: 6068
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-6068-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLT, XLT Sport | 8 Cyl 4.6 L GAS
View related parts
2002 Ford Explorer Motor Mount, Driver Side Part Number: 6L2Z-6031-BA
$28.44 MSRP: $39.34
You Save: $10.90 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Engine Mount, Left; Motor Mount Bracket; Front Mount; Bracket; Engine Mount Bracket
- Position: Driver Side
- Replaces: 7A2Z-6031-BB
- Base No.: 6031
- Item Weight: 3.70 Pounds
- Item Dimensions: 8.0 x 7.9 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-6031-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLT, XLT Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2002 Ford Explorer Transmission Mount Part Number: 5L2Z-6068-BA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Replaces: 1L2Z-6068-BA
- Base No.: 6068
- Item Weight: 3.10 Pounds
- Item Dimensions: 10.5 x 6.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, Postal, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2002 Ford Explorer Motor Mount, Driver Side Part Number: 5L2Z-6038-BC
Product Specifications
- Other Name: Insulator Assembly - Engine; Engine Mount, Left; Engine Mount Bracket; Front Mount; Insulator Assembly - Engine Support
- Position: Driver Side
- Base No.: 6038B
- Item Weight: 3.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-6038-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, Postal, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
2002 Ford Explorer Transmission Mount Part Number: 5L2Z-6068-DA
Product Specifications
- Other Name: Insulator Assembly - Engine; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator Assembly - Engine Support
- Base No.: 6068
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-6068-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLT, XLT Sport | 8 Cyl 4.6 L GAS

2002 Ford Explorer Engine Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Explorer Engine Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Explorer Engine Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Explorer Engine Mount Parts Q&A

Q: How to service and repair the engine mounts on all on 2002 Ford Explorer?
A: The procedure for servicing and repairing engine support insulators on all vehicles requires disconnecting the battery ground cable followed by upper radiator fan shroud removal. Entering maintenance on the engine support insulators begins with lifting the vehicle onto a hoist after removing nuts from the right side motor mount. The first service starts by allowing both transmission-to-crossmember nuts to loosen and then removing nuts from the right side and left side stabilizer bars. Correct service and repair of 4X4 vehicle axle housing bushings begins with extracting the right side bolt followed by removal of left side lower and upper axle housing bushings. All vehicles require removal of the left front tire before proceeding to take off the right lower mount nut followed by its washer then the left lower mount nut with its washer. Start by taking out the bolt from the left side motor mount before inserting an appropriate jack to lift the right engine side. This will create enough space to remove the right motor mount followed by taking out the right side motor mount. The engine lifting process will be repeated to remove the left motor mount by lifting the engine from its left side. The installation ends when you perform the reverse procedure of removal.