OEM 2002 Ford Explorer Ignition Lock Cylinder

2002 Ford Explorer Ignition Lock Cylinder Parts Questions & Experts Answers

• Q: How to Service and Repair an Ignition Lock Cylinder on 2002 Ford Explorer?

  A: Service and repair procedures on the ignition lock cylinder must begin with disconnecting the battery ground cable and waiting for one minute. Detach the shift lever boot from the shrouds without a prying device by carefully pulling it off from the surrounding areas. After that, remove the screws that secure the instrument panel steering column cover. You need to disconnect the electrical connector after you remove all steering column shrouds screws. You will need to take out the screw together with the PATS transceiver component. The ignition key must be placed in the ACCESSORY position before using a rod to push down the ignition lock cylinder release pin and removing the lock cylinder. The installation ends when you run through the previous steps backward and check that the ignition lock cylinder functions properly.