OEM 2002 Ford Explorer Sport Trac Automatic Transmission Filter

2002 Ford Explorer Sport Trac Automatic Transmission Filter Parts Q&A

• Q: How to Service and Repair the Automatic Transmission Filter on 2002 Ford Explorer Sport Trac?

  A: A hoist along with neutral position should be used to service and repair automatic transmission fluid filters. The removal of the fluid pan depends on the presence of a transmission servo heat shield which needs unclipping through the rail to proceed. Place a drain pan underneath the transmission fluid pan and drain the transmission fluid while moving the heat shield aside after loosening its nut. Loosen only two front transmission fluid pan bolts before prying the pan's rear portion downward to empty out residual fluid before front screw removal. Cleaning the pan and magnet along with their surfaces before disposing of the old components and filter. Perform transmission fluid cooler and lines flushing as a first installation step. The new O-ring seals on the fluid filter require application of transmission fluid before installation onto the main control valve body. Set the oil pan magnet inside the fluid pan then install a newly placed gasket before starting to put screws on the pan loosely. Prior to finishing the installation follow a crisscross pattern for screw tightening and secure the servo heat shield in place if present. Begin by lowering the vehicle while applying the park brake then start the engine operation. To fill an empty transmission and converter start with at least 3.7 liters (4 quarts) of fresh automatic transmission fluid before checking proper operation and testing the range selector lever through all gear positions and checking fluid level once more.