How to Service and Repair a Two-Piece Rear Drive Shaft on 2002 Ford F-150?

To carry out repairs on the two-piece rear driveshaft start by lifting the vehicle into neutral and supporting it properly. Set markers on three parts including the rear flange and pinion flange in addition to the coupling shaft and extension housing. The four bolts securing the driveshaft to the axle need to be detached. The driveshaft rear flange fits tightly to the pinion flange of the rear axle due to its design constraint so handle it carefully while avoiding any hammering activity on components or shafts. A proper tool should be used to apply gentle force on the specified location for detaching the rear flange from the pinion flange. After flange disconnect you can remove the driveshaft by sinking it then moving the driveshaft slip yoke backwards off the output shaft. The original bolts requiring retention of the driveshaft to axle need Threadlock and Sealer EOAZ-19554-AA product applied to their threads to serve as replacement together with any equivalent substance complying with Ford WSK-M2G351-AS standards. The driveshaft rear flange needs to establish a square fit on the pinion flange which can be achieved through even and cross-pattern bolt tightening. The reversing steps from removal will finalize the installation process.

OEM 2002 Ford F-150 Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Drive Shafts found

View related parts
2002 Ford F-150 Drive Axle, Front Passenger Side Part Number: 3L3Z-3219-AA
$111.66 MSRP: $154.46
You Save: $42.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Drive Axle Shaft, Front Right; Axle Shaft; Axle Shafts; Axle Assembly
- Position: Front Passenger Side
- Replaces: F65Z-3219-AA
- Item Weight: 9.00 Pounds
- Item Dimensions: 27.5 x 5.5 x 13.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-3219-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2002 Ford F-150 Drive Shaft Part Number: 4L3Z-4602-AAB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Weight: 30.90 Pounds
- Item Dimensions: 10.1 x 12.9 x 54.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-4602-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2002 Ford F-150 Drive Shaft Part Number: 1L3Z-4602-AA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Weight: 25.50 Pounds
- Item Dimensions: 9.7 x 13.0 x 56.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L3Z-4602-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2002 Ford F-150 Drive Shaft Part Number: XL3Z-4602-DA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 9.8 x 13.0 x 55.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-4602-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2002 Ford F-150 Drive Shaft Part Number: XL3Z-4602-A
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 25.9 x 6.1 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-4602-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2002 Ford F-150 Drive Shaft Part Number: F75Z-4A376-BB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4A376
- Item Weight: 24.00 Pounds
- Item Dimensions: 43.5 x 5.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-4A376-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2002 Ford F-150 Drive Shaft Part Number: F75Z-4602-JA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 10.0 x 12.8 x 56.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-4602-JA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2002 Ford F-150 Drive Shaft Part Number: F65Z-4602-NB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 25.2 x 6.0 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-4602-NB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2002 Ford F-150 Drive Shaft Part Number: F65Z-4602-MC
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 25.9 x 6.2 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-4602-MC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2002 Ford F-150 Drive Shaft Part Number: F65Z-4602-LA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Item Dimensions: 10.0 x 12.9 x 55.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-4602-LA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2002 Ford F-150 Submodels:
- XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2002 Ford F-150 Drive Shaft Part Number: 1L3Z-4R602-BA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Item Weight: 53.50 Pounds
- Item Dimensions: 9.9 x 13.2 x 55.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L3Z-4R602-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2002 Ford F-150 Drive Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford F-150 Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford F-150 Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford F-150 Drive Shaft Parts Q&A

Q: How to Service and Repair a Two-Piece Rear Drive Shaft on 2002 Ford F-150?
A: To carry out repairs on the two-piece rear driveshaft start by lifting the vehicle into neutral and supporting it properly. Set markers on three parts including the rear flange and pinion flange in addition to the coupling shaft and extension housing. The four bolts securing the driveshaft to the axle need to be detached. The driveshaft rear flange fits tightly to the pinion flange of the rear axle due to its design constraint so handle it carefully while avoiding any hammering activity on components or shafts. A proper tool should be used to apply gentle force on the specified location for detaching the rear flange from the pinion flange. After flange disconnect you can remove the driveshaft by sinking it then moving the driveshaft slip yoke backwards off the output shaft. The original bolts requiring retention of the driveshaft to axle need Threadlock and Sealer EOAZ-19554-AA product applied to their threads to serve as replacement together with any equivalent substance complying with Ford WSK-M2G351-AS standards. The driveshaft rear flange needs to establish a square fit on the pinion flange which can be achieved through even and cross-pattern bolt tightening. The reversing steps from removal will finalize the installation process.