How to Service the Rear Two-Piece Drive Shaft on 2001 Ford F-150?

Service of the rear two-piece driveshaft begins by putting the vehicle into neutral gear and providing adequate vehicle support. Mark the indices on the rear flange and pinion flange together with the coupling shaft and extension housing. The service requires removal of the four bolts which secure the driveshaft in place. You must exercise care when working with this system because the driveshaft rear flange delivers a tight connection to the pinion flange pilot. Do not strike the driveshaft or any components. A proper tool should be used for prying actions only in the designated spot to detach the rear flange from the pinion flange. After disconnecting the driveshaft you should lower it before sliding the driveshaft slip yoke toward the rear to remove it off the output shaft. It is possible to maintain the driveshaft to the axle connection by treating original bolts with Thread Lock and Sealer EOAZ-19554-AA or an equivalent product that satisfies Ford specification WSK-M2G351-A5. A proper drive shaft rear flange connection must be ensured by evenly tightening all bolts in a cross pattern with respect to the rear axle pinion flange. To finish installation the technician should work backwards following the removal steps.

OEM 2001 Ford F-150 Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Drive Shafts found

View related parts
2001 Ford F-150 Drive Axle, Front Passenger Side Part Number: 3L3Z-3219-AA
$111.66 MSRP: $154.46
You Save: $42.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Drive Axle Shaft, Front Right; Axle Shaft; Axle Shafts; Axle Assembly
- Position: Front Passenger Side
- Replaces: F65Z-3219-AA
- Item Weight: 9.00 Pounds
- Item Dimensions: 27.5 x 5.5 x 13.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-3219-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: 4L3Z-4602-AAB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Weight: 30.90 Pounds
- Item Dimensions: 10.1 x 12.9 x 54.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-4602-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
- Base, XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: XL3Z-4602-DA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 9.8 x 13.0 x 55.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-4602-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: XL3Z-4602-BB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Weight: 30.30 Pounds
- Item Dimensions: 25.9 x 6.1 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-4602-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: XL3Z-4602-A
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 25.9 x 6.1 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-4602-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: F75Z-4A376-BB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4A376
- Item Weight: 24.00 Pounds
- Item Dimensions: 43.5 x 5.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-4A376-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: F75Z-4602-JA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 10.0 x 12.8 x 56.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-4602-JA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
- XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: F75Z-4602-EA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Weight: 27.50 Pounds
- Item Dimensions: 9.8 x 12.8 x 54.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-4602-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
- Base, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: F75Z-4602-ACB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 26.4 x 6.1 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-4602-ACB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: F65Z-4602-NB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 25.2 x 6.0 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-4602-NB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
- XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: F65Z-4602-MC
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 25.9 x 6.2 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-4602-MC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
- Base, XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: F65Z-4602-FA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 10.1 x 12.7 x 55.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-4602-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford F-150 Submodels:
- Base, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: 3L3Z-4R602-DA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Item Dimensions: 9.8 x 12.8 x 55.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-4R602-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2001 Ford F-150 Submodels:
- Base, XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2001 Ford F-150 Drive Shaft Part Number: 1L3Z-4R602-AA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Item Dimensions: 9.9 x 13.0 x 55.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L3Z-4R602-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2001 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2001 Ford F-150 Drive Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford F-150 Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford F-150 Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford F-150 Drive Shaft Parts Q&A

Q: How to Service the Rear Two-Piece Drive Shaft on 2001 Ford F-150?
A: Service of the rear two-piece driveshaft begins by putting the vehicle into neutral gear and providing adequate vehicle support. Mark the indices on the rear flange and pinion flange together with the coupling shaft and extension housing. The service requires removal of the four bolts which secure the driveshaft in place. You must exercise care when working with this system because the driveshaft rear flange delivers a tight connection to the pinion flange pilot. Do not strike the driveshaft or any components. A proper tool should be used for prying actions only in the designated spot to detach the rear flange from the pinion flange. After disconnecting the driveshaft you should lower it before sliding the driveshaft slip yoke toward the rear to remove it off the output shaft. It is possible to maintain the driveshaft to the axle connection by treating original bolts with Thread Lock and Sealer EOAZ-19554-AA or an equivalent product that satisfies Ford specification WSK-M2G351-A5. A proper drive shaft rear flange connection must be ensured by evenly tightening all bolts in a cross pattern with respect to the rear axle pinion flange. To finish installation the technician should work backwards following the removal steps.