How to Service and Repair the Rear Vehicle Speed Sensor on 2002 Ford Focus?

Service and repair of the Output Shaft Speed (OSS) Sensor begins with vehicle support and placement of a drain pan below the OSS sensor. Then, disconnect its electrical connector and remove the bolt before checking the OSS bore. Begin by detaching the electrical connector together with the bolt from the OSS sensor before inspecting the OSS bore. Assess the condition of the O-ring seal to check for damages and change it when required. Petroleum jelly application with a thin coat must precede the O-ring installation step. Reconnect electric wiring to the OSS sensor while performing its installation. Verify the transmission fluid level when done lowering the vehicle then fill it up with automatic transmission fluid if needed. After starting the engine the transaxle range selector lever should be maneuvered through every gear position.

OEM 2002 Ford Focus Vehicle Speed Sensor

VSS

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Vehicle Speed Sensors found

View related parts
2002 Ford Focus Vehicle Speed Sensor Part Number: YS4Z-9E731-AB
$154.24 MSRP: $498.18
You Save: $343.94 (70%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Tripminder
- Replaces: YS4Z-9E731-AA
- Base No.: 9E731
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-9E731-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2002 Ford Focus Vehicle Speed Sensor Part Number: 97BZ-9E731-AA
Product Specifications
- Other Name: Sensor Assembly - Tripminder; Sensor
- Base No.: 9E731
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 1.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 97BZ-9E731-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2002 Ford Focus Vehicle Speed Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Focus Vehicle Speed Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Focus Vehicle Speed Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Focus Vehicle Speed Sensor Parts Q&A

Q: How to Service and Repair the Rear Vehicle Speed Sensor on 2002 Ford Focus?
A: Service and repair of the Output Shaft Speed (OSS) Sensor begins with vehicle support and placement of a drain pan below the OSS sensor. Then, disconnect its electrical connector and remove the bolt before checking the OSS bore. Begin by detaching the electrical connector together with the bolt from the OSS sensor before inspecting the OSS bore. Assess the condition of the O-ring seal to check for damages and change it when required. Petroleum jelly application with a thin coat must precede the O-ring installation step. Reconnect electric wiring to the OSS sensor while performing its installation. Verify the transmission fluid level when done lowering the vehicle then fill it up with automatic transmission fluid if needed. After starting the engine the transaxle range selector lever should be maneuvered through every gear position.