How to service and repair the rear parking brake cable and conduit on 2002 Ford Ranger?

Begin repairs of the rear parking brake cable and conduit only when you fully release the parking brake control along with releasing all parking brake system tension. Start your procedure by extending the front parking brake cable while also stretching its conduit and inserting a 4 mm drill bit or any equivalent retainer. Disconnect the parking brake intermediate cable from its positioning hole on the connector before removing it from the LH parking brake rear cable and conduit. The RH parking brake rear cable and conduit together with the LH parking brake rear cable and conduit must be separated at the parking brake cable equalizer before you use the parking brake cable clip to release the RH parking brake rear cable and conduit from the parking brake cable bracket. The installation requires detachment of the LH parking brake rear cable and conduit from the rear parking brake cable retainer followed by removing the RH parking brake rear cable and conduit from the RH hydraulic brake line clips. Begin by unclipping both parking brake rear cable and conduit from the brake line clip on top of the rear axle housing followed by disconnecting the parking brake cable from the parking brake lever. The removal of the parking brake rear cable and conduit requires compressing the retainer fingers. The installation process should reverse the uninstall steps.

OEM 2002 Ford Ranger Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Parking Brake Cables found

View related parts
2002 Ford Ranger Front Cable
Part Number: 4L5Z-2853-AA
$36.07 MSRP: $57.27
You Save: $21.20 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Parking Brake Cable, Front; Brake Cable
- Position: Front
- Replaces: 3L5Z-2853-AA
- Base No.: 2853
- Item Weight: 1.20 Pounds
- Item Dimensions: 1.5 x 1.6 x 45.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-2853-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2002 Ford Ranger Rear Cable, Driver Side
Part Number: 1L5Z-2A635-DB
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable asy. (brake rear) - LH - 9 and 10" brakes - 2001/2002
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 1.70 Pounds
- Item Dimensions: 0.1 x 14.4 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-2A635-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Ranger Submodels:
- Edge, FX4, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2002 Ford Ranger Rear Cable
Part Number: XL5Z-2A635-CA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable asy. (brake rear) - RH - 10" brakes- 1999/2000
- Replaces: F87Z-2A635-HA
- Base No.: 2A635
- Item Weight: 2.80 Pounds
- Item Dimensions: 26.0 x 20.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL5Z-2A635-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Ranger Submodels:
- Edge, Splash, Sport, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2002 Ford Ranger Rear Cable, Driver Side
Part Number: XL5Z-2A635-BB
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable asy. (brake rear) - LH - 9 and 10" brakes- 1998/2000
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 1.70 Pounds
- Item Dimensions: 0.1 x 14.3 x 14.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL5Z-2A635-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Ranger Submodels:
- Edge, FX4, Splash, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2002 Ford Ranger Rear Cable
Part Number: 2L5Z-2A635-BA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: 1L5Z-2A635-DA
- Item Weight: 2.10 Pounds
- Item Dimensions: 11.9 x 8.8 x 19.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L5Z-2A635-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Ranger Submodels:
- Edge, FX4, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2002 Ford Ranger Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Ranger Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Ranger Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Ranger Parking Brake Cable Parts Questions & Experts Answers

Q: How to service and repair the rear parking brake cable and conduit on 2002 Ford Ranger?
A: Begin repairs of the rear parking brake cable and conduit only when you fully release the parking brake control along with releasing all parking brake system tension. Start your procedure by extending the front parking brake cable while also stretching its conduit and inserting a 4 mm drill bit or any equivalent retainer. Disconnect the parking brake intermediate cable from its positioning hole on the connector before removing it from the LH parking brake rear cable and conduit. The RH parking brake rear cable and conduit together with the LH parking brake rear cable and conduit must be separated at the parking brake cable equalizer before you use the parking brake cable clip to release the RH parking brake rear cable and conduit from the parking brake cable bracket. The installation requires detachment of the LH parking brake rear cable and conduit from the rear parking brake cable retainer followed by removing the RH parking brake rear cable and conduit from the RH hydraulic brake line clips. Begin by unclipping both parking brake rear cable and conduit from the brake line clip on top of the rear axle housing followed by disconnecting the parking brake cable from the parking brake lever. The removal of the parking brake rear cable and conduit requires compressing the retainer fingers. The installation process should reverse the uninstall steps.