What precautions should be taken when servicing the fuel rail to ensure safety and proper procedure on 2002 Lincoln Blackwood?

When fuel rail is being serviced, one should not smoke around fuel parts since they are explosive. De-pressurize the fuel system then disconnect lines. Deassemble the upper intake manifold, strip off the fuel lines and injectors and check the O-ring seals, replacing them as necessary. Invert the steps of installation, lubricating new O-rings using engine oil.

OEM 2002 Lincoln Blackwood Fuel Rail

Engine Fuel Rail

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Rail found

View related parts
2002 Lincoln Blackwood Fuel Rail Part Number: XL1Z-9F792-DG
$757.35 MSRP: $1122.00
You Save: $364.65 (33%)
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Fuel Supply
- Manufacturer Note: DOHC
- Replaces: XL1Z-9F792-DA
- Base No.: 9F792
- Item Weight: 3.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL1Z-9F792-DG
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln Blackwood Submodels:
- Base | 8 Cyl 5.4 L GAS

2002 Lincoln Blackwood Fuel Rail

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln Blackwood Fuel Rail available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln Blackwood Fuel Rail as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Lincoln Blackwood Fuel Rail Parts Q&A

Q: What precautions should be taken when servicing the fuel rail to ensure safety and proper procedure on 2002 Lincoln Blackwood?
A: When fuel rail is being serviced, one should not smoke around fuel parts since they are explosive. De-pressurize the fuel system then disconnect lines. Deassemble the upper intake manifold, strip off the fuel lines and injectors and check the O-ring seals, replacing them as necessary. Invert the steps of installation, lubricating new O-rings using engine oil.