FordParts
My Garage
My Account
Cart
OEM 2002 Lincoln Blackwood Shift Cable
Transmission Shift Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Shift Cable found
2002 Lincoln Blackwood Shift Control Cable Part Number: YL3Z-7E395-AC
$63.42 MSRP: $92.32You Save: $28.90 (32%)Product Specifications- Other Name: Cable Assembly - Selector Lever Control; Automatic Transmission Shifter Cable
- Manufacturer Note: 4R100, FROM 7/19/00
- Replaces: XL3Z-7E395-AB
- Base No.: 7E395
- Item Weight: 2.50 Pounds
- Item Dimensions: 30.9 x 8.1 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL3Z-7E395-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Lincoln Blackwood Shift Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln Blackwood Shift Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln Blackwood Shift Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Lincoln Blackwood Shift Cable Parts Q&A
- Q: How to Service and Repair the Shift Cable for the Transmission Selector Lever on 2002 Lincoln Blackwood?A: The service process for transmission selector lever cable repair starts by disconnecting the lower dash panel followed by the removal of specified components for the repair work. The minimal operating procedure to install this cable starts by following the removal process in reverse order. The cable grommet should be pressed through the bulkhead before installation which must include a tight fit against the bulkhead to avoid water entry into the passenger compartment. Adjusting of the shift cable occurs following its installation. Set the range selector lever to position (D) while attaching a weight of three pounds to it. To begin adjustment raise and support the vehicle while disconnecting the transmission shift cable end from the manual control lever and unlock the lock tab on the cable end. Manually shift the control lever to (D) position after which you should advance it to first gear position and two detents to (D) position. Position the transmission shift cable end on the manual control lever before sticking the cable end lock tab. Lower the vehicle while removing the range selector lever weight. The range selector lever should be tested across its full transmission traverse while stopping at each detent so that the park position activates correctly and neutral position activates correctly and reverse lamps verify illumination in reverse position. The adjustment of the transmission range (TR) sensor needs to be redone when a vehicle fails to start in park or neutral positions or vice versa the reverse lamps do not illuminate.