How to Service and Repair the Front ABS Sensor on 2002 Mercury Mountaineer?

The first step when servicing or repairing the front ABS sensor is to take off the wheel with its tire. Secure the brake hose while you remove its bolts because you must set aside both caliper and support bracket after disposing of those bolts. Before removing the brake disc, it is essential to create match marks between the hub and disc. The front ABS sensor connectors are situated inside the engine bay attached to the fender aprons; therefore, users should detach the ABS sensor connector and then remove the harness from its retainers. The sensor removal process commences by breaking the bolt followed by the sensor dislodgement. Seal the sensor mount opening while cleaning the surface where the ABS sensor will be installed and add grease to it. The installation process involves the opposite order of removal while applying anti-seize lubricant to the hub mounting surface and using brake parts cleaner for brake disc cleaning. Apply proper alignment of the brake disc to the match marks which were marked during brake disc removal.

OEM 2002 Mercury Mountaineer ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Sensors found

View related parts
2002 Mercury Mountaineer ABS Sensor, Front Driver Side
Part Number: 4L2Z-2C204-C
$73.48 MSRP: $120.91
You Save: $47.43 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Wheel Speed Sensor; ABS Speed Sensor; Speed Sensor; Front Speed Sensor
- Position: Front Driver Side
- Replaces: 3L2Z-2C204-AA, BRAB-12, 1L2Z-2C204-AC, BRAB-469, 3C5Z-2C204-AA, 4L2Z-2C204-B, BRAB-405, 4L2Z-2C204-A
- Item Weight: 1.20 Pounds
- Item Dimensions: 15.5 x 10.9 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-2C204-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2002 Mercury Mountaineer ABS Sensor, Rear Passenger Side
Part Number: 2L2Z-2C190-AC
$96.47 MSRP: $131.28
You Save: $34.81 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Wheel Speed Sensor; Speed Sensor; Rear Speed Sensor
- Position: Rear Passenger Side
- Base No.: 2C190
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.9 x 3.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L2Z-2C190-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2002 Mercury Mountaineer ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Mercury Mountaineer ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Mercury Mountaineer ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Mercury Mountaineer ABS Sensor Parts Questions & Experts Answers

Q: How to Service and Repair the Front ABS Sensor on 2002 Mercury Mountaineer?
A: The first step when servicing or repairing the front ABS sensor is to take off the wheel with its tire. Secure the brake hose while you remove its bolts because you must set aside both caliper and support bracket after disposing of those bolts. Before removing the brake disc, it is essential to create match marks between the hub and disc. The front ABS sensor connectors are situated inside the engine bay attached to the fender aprons; therefore, users should detach the ABS sensor connector and then remove the harness from its retainers. The sensor removal process commences by breaking the bolt followed by the sensor dislodgement. Seal the sensor mount opening while cleaning the surface where the ABS sensor will be installed and add grease to it. The installation process involves the opposite order of removal while applying anti-seize lubricant to the hub mounting surface and using brake parts cleaner for brake disc cleaning. Apply proper alignment of the brake disc to the match marks which were marked during brake disc removal.