How to service the front ABS sensor on Mercury Mountaineer?

The front ABS sensor service begins by taking off the front brake disk. After disconnecting the electrical connector from the ABS sensor, you need to remove its harness bolt before reinstallation, which requires 8 Nm (71 lb-in) torque. The procedure for removing the ABS sensor begins with unfastening its bolt and harness pin-type retainers before sensor removal. Reinstallation requires sensor bolt torque to 17 Nm (150 lb-in). Toward the end of installation, you need to execute a reverse procedure of the initial removal process.

How to Service and Repair the Rear Wheel ABS Sensor and Sensor Ring on Mercury Mountaineer?

The service and repair operations on the rear ABS sensor with sensor ring start with disconnecting the battery ground cable followed by hoisting the vehicle into position. Vehicle owners must remove components in the correct sequence for 3-channel ABS vehicles by detaching the sensor ring from the ring gear that is mounted on the rear differential case. For cars with 4-channel ABS, the removal sequence must be followed to detach the sensor ring which connects to the rear axle shaft. Recovery of the sensor necessitates performing the opposite steps of installation. The installation process demands the use of a fresh O-ring.

OEM Mercury Mountaineer ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 ABS Sensors found

View related parts
Mercury Mountaineer ABS Sensor, Front Driver Side Part Number: 4L2Z-2C204-C
$72.02 MSRP: $120.91
You Save: $48.89 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Wheel Speed Sensor; ABS Speed Sensor; Speed Sensor; Front Speed Sensor
- Position: Front Driver Side
- Replaces: 3L2Z-2C204-AA, BRAB-12, 1L2Z-2C204-AC, BRAB-469, 3C5Z-2C204-AA, 4L2Z-2C204-B, BRAB-405, 4L2Z-2C204-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer ABS Sensor, Rear Passenger Side Part Number: 2L2Z-2C190-AC
$96.47 MSRP: $131.28
You Save: $34.81 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Wheel Speed Sensor; Speed Sensor; Rear Speed Sensor
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer ABS Sensor, Rear Passenger Side Part Number: 8L2Z-2C190-B
$85.64 MSRP: $140.91
You Save: $55.27 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Right; ABS Speed Sensor; Speed Sensor; Rear Speed Sensor; ABS Wheel Speed Sensor
- Position: Rear Passenger Side
- Replaces: 6L2Z-2C190-AA, 7L2Z-2C190-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer ABS Sensor, Rear Driver Side Part Number: 8L2Z-2C190-A
$81.99 MSRP: $134.91
You Save: $52.92 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left; Speed Sensor; Rear Speed Sensor; ABS Wheel Speed Sensor
- Position: Rear Driver Side
- Replaces: 6L2Z-2C216-AA, 7L2Z-2C216-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer ABS Sensor, Front Part Number: XL2Z-2C204-AB
$96.71 MSRP: $162.36
You Save: $65.65 (41%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front, Front Left, Front Right; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front
- Replaces: YL5Z-2C204-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer ABS Sensor, Front Part Number: 7L2Z-2C204-B
$50.28 MSRP: $82.73
You Save: $32.45 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front, Front Left, Front Right; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Front
- Replaces: 6L2Z-2C204-A, BRAB-170
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer ABS Sensor, Front Part Number: 6L5Z-2C204-BA
$50.50 MSRP: $83.09
You Save: $32.59 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Speed Sensor; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front
- Replaces: 3L5Z-2C204-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005, 1998-2001 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer ABS Sensor, Front Part Number: F5TZ-2C204-AA
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; Front Speed Sensor
- Manufacturer Note: LH, 4x2
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997 Mercury Mountaineer | Base | 8 Cyl 5.0 L GAS

Mercury Mountaineer ABS Sensor

OEM ABS Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get ABS Sensor with long life and a perfect fit. Come to our website and find genuine Mercury Mountaineer parts. We keep a wide inventory of OEM Mountaineer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Mercury Mountaineer ABS Sensor is an essential part of the ABS system in the Mountaineer automobile product line reported to be reliable and available for the models of Mercury Mountaineer ranging from 1996 to 2010. This kind of ABS Sensor or more commonly referred to as a wheel speed sensor is necessary for the monitoring of wheel rotation and preventing the wheels from locking up during a brake hence making the car efficient and safe. With the use of Hall effect sensors or electromagnetic coils, the Mercury Mountaineer ABS Sensor produces digital voltage output which reports the computer of the car the speed of the wheel in order to achieve the premier braking possible on any type of road possible. However, despite its lower accuracy at low speed, its meaningfulness in providing the right brake cannot be overemphasised. The Mercury Mountaineer with overstated amenities and muscularity has had three successive updates to the ABS Sensor that is model-dependent. This adaptability speaks volume for Mercury ABS Sensor in this automotive market where safety and reliability plays major role. As the third generation of the Mountaineer, Ford included new and enhanced options, which include and adjustable DVD-based navigation system, power-retracting running boards to enhance the drive. In sum, this Mercury ABS Sensor review finds it a very important component to assure safe and effective use of the Mountaineer vehicle, which is why many car owners can have confidence in getting this product to make the most of their car.

Mercury Mountaineer ABS Sensor Parts and Q&A

ABS Sensor, Front
7L2Z-2C204-B
Q: How to service the front ABS sensor on Mercury Mountaineer?
A:
The front ABS sensor service begins by taking off the front brake disk. After disconnecting the electrical connector from the ABS sensor, you need to remove its harness bolt before reinstallation, which requires 8 Nm (71 lb-in) torque. The procedure for removing the ABS sensor begins with unfastening its bolt and harness pin-type retainers before sensor removal. Reinstallation requires sensor bolt torque to 17 Nm (150 lb-in). Toward the end of installation, you need to execute a reverse procedure of the initial removal process.
ABS Sensor, Rear Passenger Side
2L2Z-2C190-AC
Q: How to Service and Repair the Rear Wheel ABS Sensor and Sensor Ring on Mercury Mountaineer?
A:
The service and repair operations on the rear ABS sensor with sensor ring start with disconnecting the battery ground cable followed by hoisting the vehicle into position. Vehicle owners must remove components in the correct sequence for 3-channel ABS vehicles by detaching the sensor ring from the ring gear that is mounted on the rear differential case. For cars with 4-channel ABS, the removal sequence must be followed to detach the sensor ring which connects to the rear Axle Shaft. Recovery of the sensor necessitates performing the opposite steps of installation. The installation process demands the use of a fresh O-ring.