OEM 2002 Mercury Sable Ignition Lock Cylinder

2002 Mercury Sable Ignition Lock Cylinder Parts Questions & Experts Answers

• Q: How to service a non-functional Ignition Lock Cylinder on 2002 Mercury Sable?

  A: You need to start servicing a non-functional ignition switch lock cylinder by powering down the supplemental restraint system (SRS) followed by removing the steering wheel assembly. Remove the cap attachment of the ignition switch cylinder. Vehicle service technicians need to discard the inoperative lock cylinder while using correct lock repair package components to build a new lock cylinder that matches the existing key code. Drill out the lock cylinder retaining pin with a 1/8-inch drill bit before breaking the ignition lock cylinder loose with drilling through the center of the key slot using a 3/8-inch drill bit. Categorize the old ignition switch lock cylinder then brush away drill debris that exists in the steering column. Start by taking out the bearing retainer and bearing and gear and inspect the steering column for damage while cleaning every drill shaving from its surface. The installation sequence requires first placing gear and bearing then adding the retainer and finishing with the new ignition switch lock cylinder. Check the functionality of the ignition switch lock cylinder prior to steering wheel installation according to all warnings and steering wheel installation/removal procedures. The last step includes reactivation of the Supplemental Restraint System (SRS).