How to Service the Oil Pressure Switch on 2002 Mercury Villager?

Removal of the battery ground and hoisting of the vehicle is needed to service the oil pressure switch. To eliminate the switch, strip off the electrical connector. Heat Pipe Sealant with Teflon to the threads of the new switch, fit the switch, reconnect electrical connector and then reconnect the battery ground cable.

OEM 2002 Mercury Villager Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2002 Mercury Villager Oil Pressure Sending Unit Part Number: F3XY-9278-B
$24.37 MSRP: $33.16
You Save: $8.79 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Sw
- Manufacturer Note: #25240,89920
- Base No.: 9278
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.3 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F3XY-9278-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Mercury Villager Submodels:
- Base, Estate, GS, LS, Nautica, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

2002 Mercury Villager Oil Pressure Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Mercury Villager Oil Pressure Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Mercury Villager Oil Pressure Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Mercury Villager Oil Pressure Switch Parts Q&A

Q: How to Service the Oil Pressure Switch on 2002 Mercury Villager?
A: Removal of the battery ground and hoisting of the vehicle is needed to service the oil pressure switch. To eliminate the switch, strip off the electrical connector. Heat Pipe Sealant with Teflon to the threads of the new switch, fit the switch, reconnect electrical connector and then reconnect the battery ground cable.