OEM 2002 Mercury Villager Radiator

2002 Mercury Villager Radiator Parts Questions & Experts Answers

• Q: How to service and repair a radiator on 2002 Mercury Villager?

  A: A service or repair process of the radiator starts by disconnecting the battery ground cable and draining the cooling system. You need to detach the wires from the fan shroud before disconnecting the lower radiator hose and lower transmission cooler line. Place the lowered vehicle while moving aside both relay box and coolant reservoir hose. The cooling fan electrical connector should be disconnected first while moving the upper transmission cooler line and upper radiator hose to the side before removing the radiator assembly. The radiator assembly can be taken out after performing radiator bracket bolt removal. During new radiator installation move the cooling fan assembly between old and new units. The vehicle will show abnormal drive symptoms during re-adaptive learning but it needs at least 16 km (10 mi) of driving to finish this process after disconnecting and reconnecting the battery. Exterior faucet bolts. Install the radiator assembly by following the opposite steps of removal.