FordParts
My Garage
My Account
Cart
OEM 2003 Ford E-150 Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Throttle Bodies found
2003 Ford E-150 Throttle Body Part Number: 3C2Z-9E926-AA
$363.20 MSRP: $533.33You Save: $170.13 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Body Assembly - Carburetor Throttle; Fuel Inject Electronic Throttle Assembly
- Replaces: F81Z-9E926-BA, YC2Z-9E926-BA, YC3Z-9E926-AA, F81Z-9E926-AA
- Base No.: 9E926
- Item Weight: 2.00 Pounds
- Item Dimensions: 7.5 x 5.6 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3C2Z-9E926-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford E-150 Throttle Body Part Number: 1C2Z-9E926-AA
Product Specifications- Other Name: Body Assembly - Carburetor; Body Assembly - Carburettor Throttle
- Base No.: 9E926
- Item Weight: 2.60 Pounds
- Item Dimensions: 10.3 x 6.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1C2Z-9E926-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford E-150 Throttle Body
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford E-150 Throttle Body available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford E-150 Throttle Body as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford E-150 Throttle Body Parts Q&A
- Q: What safety precautions should be taken when servicing the throttle body on 2003 Ford E-150?A: Service safety demands avoiding all exposure to smoke and flames in the vicinity of fuel-related pieces since flammable mixtures exist and may cause bodily harm. The throttle body bore alongside plate area features an uncleanable special coating. The service starts with air cleaner assembly removal from throttle body followed by unclipping the snow shield. The driver must disconnect the Throttle Position (TP) sensor electrical connector while removing both the accelerator cable and speed control actuator cable if the vehicle has this equipment. During this process avoid bending the cable wires. The inspection process for the throttle body gasket requires replacement with a new gasket if needed. The service must be finished by performing the opposite steps used during removal to accomplish installation.