How to Service the Headlight Switch on 2003 Ford E-250?

The first step to serve the headlamp switch requires disconnecting the battery ground cable. First disconnect the instrument panel finish panel while also removing the headlamp switch bolts. The electrical connector must be disconnected first before removing the headlamp switch. You should follow the reverse process for installation while understanding that power battery disconnection and reconnection could lead to unusual drive symptoms because the vehicle needs to relearn its adaptive control strategy through a minimum drive of 16 km (10 mi).

OEM 2003 Ford E-250 Headlight Switch

Headlamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Headlight Switch found

View related parts
2003 Ford E-250 Light Switch
Part Number: 6C2Z-11654-A
Product Specifications
- Other Name: Switch Assembly; Headlight Switch; Multi Purpose Switch; Headlamp Switch
- Replaces: E7TZ-11654-B, FOUZ-11654-A
- Base No.: 11654
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.9 x 2.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-11654-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2003 Ford E-250 Headlight Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford E-250 Headlight Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford E-250 Headlight Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford E-250 Headlight Switch Parts Questions & Experts Answers

Q: How to Service the Headlight Switch on 2003 Ford E-250?
A: The first step to serve the headlamp switch requires disconnecting the battery ground cable. First disconnect the instrument panel finish panel while also removing the headlamp switch bolts. The electrical connector must be disconnected first before removing the headlamp switch. You should follow the reverse process for installation while understanding that power battery disconnection and reconnection could lead to unusual drive symptoms because the vehicle needs to relearn its adaptive control strategy through a minimum drive of 16 km (10 mi).