How to service and repair the hood latch on diesel engines on 2003 Ford E-250?

Service and repair of diesel engine hood latches requires the technician to disconnect the battery ground cable before positioning the air cleaner assembly aside by removing the hose clamp and screws and electrical connector. Every vehicle requires removal of the radiator grille sight shield by pulling out its pin-type retainers before proceeding with hood latch disassembly by unscrewing bolts and screws and disconnecting the cable connection. The installation of the new hood latch should follow the removal steps backward until you are able to verify the hood latch alignment.

OEM 2003 Ford E-250 Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

View related parts
2003 Ford E-250 Lock, Front Part Number: 6C2Z-16700-AA
Product Specifications
- Other Name: Latch Assembly - Hood; Hood Latch, Front; Hood Latch
- Position: Front
- Replaces: F7UZ-16700-AA
- Base No.: 16700
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.3 x 3.0 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-16700-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2003 Ford E-250 Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford E-250 Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford E-250 Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford E-250 Hood Latch Parts Q&A

Q: How to service and repair the hood latch on diesel engines on 2003 Ford E-250?
A: Service and repair of diesel engine hood latches requires the technician to disconnect the battery ground cable before positioning the air cleaner assembly aside by removing the hose clamp and screws and electrical connector. Every vehicle requires removal of the radiator grille sight shield by pulling out its pin-type retainers before proceeding with hood latch disassembly by unscrewing bolts and screws and disconnecting the cable connection. The installation of the new hood latch should follow the removal steps backward until you are able to verify the hood latch alignment.