How to service the windshield washer pump and reservoir on 2003 Ford E-250?

If the windshield needs to be serviced, the windshield washer reservoir and pump can be accessed after lifting the hood, battery and tray, and unplugging the washer hose. Take up any spilled fluid, and take off the pump and reservoir. Installation requires filling the reservoir with water and then electricity connections should be made. Installation is done by reversing the steps.

OEM 2003 Ford E-250 Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Pump found

View related parts
2003 Ford E-250 Water Pump, Front Part Number: E5TZ-17664-B
$20.38 MSRP: $33.09
You Save: $12.71 (39%)
ADD TO CART
Product Specifications
- Other Name: Motor And Pump Assembly; Windshield Washer Pump, Front; Washer Pump Repair Kit; Washer Pump; Front Washer Pump; Rear Washer Pump; Pump; Windshield Washer Pump
- Position: Front
- Base No.: 17664
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.9 x 2.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E5TZ-17664-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2003 Ford E-250 Washer Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford E-250 Washer Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford E-250 Washer Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford E-250 Washer Pump Parts Q&A

Q: How to service the windshield washer pump and reservoir on 2003 Ford E-250?
A: If the windshield needs to be serviced, the windshield washer reservoir and pump can be accessed after lifting the hood, battery and tray, and unplugging the washer hose. Take up any spilled fluid, and take off the pump and reservoir. Installation requires filling the reservoir with water and then electricity connections should be made. Installation is done by reversing the steps.