How to service and repair the hazard warning switch on 2003 Ford Escape?

Disconnection of the battery ground cable should be the first step when servicing the hazard warning switch. The instrument panel center finish panel must be taken out to get access to the hazard flasher switch. Before removing the hazard flasher switch users need to disconnect its electrical connector. During installation you should follow the same steps for returning the new switch back in place.

OEM 2003 Ford Escape Hazard Warning Switch

Hazard Warning Emergency Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hazard Warning Switch found

View related parts
2003 Ford Escape Hazard Switch
Part Number: YL8Z-13350-BB
Product Specifications
- Other Name: Switch Assembly; Hazard Warning Switch; Hazard Flasher Switch
- Base No.: 13A350
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 1.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-13350-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2003 Ford Escape Hazard Warning Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Escape Hazard Warning Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Escape Hazard Warning Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Escape Hazard Warning Switch Parts Questions & Experts Answers

Q: How to service and repair the hazard warning switch on 2003 Ford Escape?
A: Disconnection of the battery ground cable should be the first step when servicing the hazard warning switch. The instrument panel center finish panel must be taken out to get access to the hazard flasher switch. Before removing the hazard flasher switch users need to disconnect its electrical connector. During installation you should follow the same steps for returning the new switch back in place.